Finally got around to Cleaning out the garage and shed.
Prices do not include shipping. shipping from Indiana 46774
Wilwood plastic reservoirs - $15 for pair
IMG_0847.jpg
Wilwood proportioning valve (used) $15
IMG_0865.jpg
Visit our community sponsor
Finally got around to Cleaning out the garage and shed.
Prices do not include shipping. shipping from Indiana 46774
Wilwood plastic reservoirs - $15 for pair
IMG_0847.jpg
Wilwood proportioning valve (used) $15
IMG_0865.jpg
Last edited by stang_killer; 03-10-2014 at 09:18 AM.
These are the original power window slides that cme with early kit. FFR went to remote mount motors, I cut one of the assemblies for the car 7 1/2 inches (Have cut piece could be welded back together. other is uncut. These were too tight for doors but would be great for different Hot rod. they come with floating window attach rollers and switches. I used the wiring for my install $100 for all of it.
IMG_0899.jpgIMG_0896.jpgIMG_0897.jpg
FFR supplied clutch quadrant for Wilwood pedal assembly includes firewall adjuster - $40
IMG_0872.jpg
Last edited by stang_killer; 03-11-2014 at 11:50 AM.
Coil over Springs
pair QA1 9-180 $30
IMG_0852.jpg
UPR Bump Steer kit - Package was opened but never installed (decided I didnt want to drill my spindles for bolt) $70 - SOLD
IMG_0866.jpgIMG_0868.jpg
Last edited by stang_killer; 03-03-2015 at 09:07 AM.
older Early kit supplied Gas cap (It came apart once and was JB welded back together) ended up changing to different type fill - $25
IMG_0894.jpgIMG_0892.jpg
FFR supplied Stainless brake lines Banjo on one end and #3 flare on other 17" long pair - $30
IMG_0887.jpgIMG_0886.jpg
Edelbrock 750 Vaccum Secondary Electric Choke- used was on car for about 1500 miles I think it is a 1411. $150
IMG_0838.jpgIMG_0839.jpg
Last edited by stang_killer; 01-10-2014 at 05:25 PM.
IMG_0844.jpglastly some stereo gear I ended up not using
MB Quart DTK-30 Tweeters - $30
IMG_0841.jpgIMG_0840.jpg
AudioBahn Crossovers - $20
IMG_0843.jpgIMG_0842.jpg
GM X562 Amp (130W) (I needed more channels than this had so never even powered it up ) $80
IMG_0845.jpg
How much including shipping for the cup holders and remote battery terminals to 60516? Happen to have a need for both!
Swan mirrors and 24" brake lines to 45385. How do you want payment?
Jack
FFR HR #530
Race car theme, Tim Whitaker roll bar, Autometer Autolite Gauges, Satin Black, SBC 383/700R4, 8.8 rear with Cobra Brakes, 3.29 gear, Boyd Tank, QA1 springs and shocks,
My build blog: http://jacks33hotrod.blogspot.com/
PMs sent to maczter and billjr212.
Last edited by stang_killer; 12-24-2013 at 09:43 AM.
paypal is fine. Can do USPS flat rate shipping for $12 ([email protected])
Pm sent on wiper motors
Major driving fun since may 2012!!!!!
TTT added edlebrock 750 carb
Sent you a PM on Brake Lines. thanks, jim