Visit our community sponsor
Sounds sweeet, congratulations!
FFR Daytona Type 65 Coupe
67 427 Cobra
57' Belair
72 Pinto Wagon ,306" 1/4 miler
34 5 window coupe Ford
2003 Mustang GT
99' ZX9
85 Goldwing
All toys still in the Scuderia!
Every Saint has a past..................every sinner a future
Don't take yourself so seriously........no one else does.
You never see a motorcycle parked outside a Psychiatrists office.
Tim,
Way to go! That is quite an install. Well done and sounds great!
Garry
I sure miss my coupe!
F5R1004503SP 2004 Challenge Car, 331 Stroker
Coupe # 031, 422" Windsor stroker by Southern Automotive (Dash autographed by Peter Brock)***SOLD***
Unique 427 Roadster, 482" Aluminum FE by Southern Automotive***SOLD***
Hello Tim,
I had been told by some of the FFR guys that the mod motors won't fit under the Coupe hood? What did you have to do to make it work? I was also wondering what the headers you were using are, and do you just plan to leave them open exit behind the wheel?
Thanks for your time!
Matt, No problem with hood clearance. The only real problem with putting a Modular in the coupe is the width and the headers. I solved these two issues with modifications to the footboxes and FFR Roadster headers and Roadster sidepipes.
FFR#2496
FFR#CP373
That's good to know! What did you have to modify in the footbox area? I'm pretty tall so cant really afford to loose any legroom.
Thanks again Tim!
What was I going to say?
Matt, For the driver side all you need is 2 pieces of FactoryFive Aluminum FFR#14718 LH 4.6L INNER WALL and FFR#14719 4.6L INNER WALL TOP.
So the Pass side was the only side I really had to modify and in doing so I also dropped the floor. So while cramping up the foot space in favor of the motor nothing was done that effected length other than increasing it by dropping the pass side floor.
One more thing you will need is a new shallower oil pan, and I would recommend the Champ pan sold by Richard Oben of NorthRacecars.
FFR#2496
FFR#CP373
Nice, so the driver's side foot area isn't effected at all?
What was I going to say?
When you say 4.6 will fit under the hood, is that only the 4 valve engine? or will the 2 valve 4.6 fit as well?
Tim, PM sent with questions
Tim, congrats, gotta love first starts without pipes :-)
MKIII #3835 IRS, Anderson Performance 408 Levy T-5 Trans, Team III Wheels
Paint completed November 2010, passed NJ State Safety Inspection June 21st, Tagged and First Drive 7/1/2011