Zero Decibel Motorsport AWIC Non-Clocked Turbo Install

[EODTech87]

Here is everything I received with the kit. (Note: The pump wasn't included in the picture)

Close up of the hardware.

First Step: Wrap all of the fitting threads with teflon tape and insert with a 22 mm or 7/8" wrench.




Install all of the silicone bends and BOV/BPV tube as shown and clamp in place using the following clamp sizes. Tighten using a 10 mm wrench.
AWIC Connection - 87/79 clamp
BOV Tubing - 75/67 clamp
Straight Piping - 62/54 clamp
Turbo - 58/50 clamp
Throttle Body - 81/76 clamp