Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Cobra Rear Axle with Full Fenders/Tire size and wheel offset

  1. #1
    Junior Member
    Join Date
    Mar 2015
    Posts
    18
    Post Thanks / Like

    Cobra Rear Axle with Full Fenders/Tire size and wheel offset

    To those of you running the Cobra rear end and full fenders, what size tire and wheel combinations are you running? Offset's? Photo of how your combination is filling up the fender wells would be good.

    Thanks,
    Andy

  2. #2
    Member
    Join Date
    Nov 2015
    Posts
    30
    Post Thanks / Like
    I am looking for the same answer, I hope someone comes up with an answer.

    Thanks,
    Muggs

  3. #3
    Member
    Join Date
    Nov 2015
    Posts
    30
    Post Thanks / Like
    I found some info that may be helpful. You will need 5.5" backspace for the front and a 6-6.5 backspace for the rear depending on the rear end you use. The Moser rear end from FF is 59.25" and needs at least a 6.0" backspace. The 94-98 mustang cobra rear end is 61.125" and would require at least .75" of backspace to fit, do I have been told. I am still looking for that rear end BTW.

    Muggs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor