Visit our community sponsor
Thanks:
0
Likes:
0
-
Cooling fan problem
just got to the motor started point and a problem came up with the cooling fan. As soon as I connect the battery the fan comes on and when I turn the key to run it goes off. I am using the RF harness with a thermal switch in the thermostat housing. I assume the switch provides a ground for the fan relay so I disconnected the switch, fan still runs.
Any ideas? This has me puzzled
Tom
Btw 302 carbed if that helps
-
Senior Member
Check the relay is wired correctly, I had a relay that was mis-wired on the RF harness mine happened to be the horn.
-
I appreciate the help. Got the meter out and figured out I had the coil/tach wire and the temp switch wire swapped. Alls good. Thanks again
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor