Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7

Thread: Does this connector no longer come in the kit?

  1. #1
    Senior Member mmklaxer's Avatar
    Join Date
    Aug 2015
    Location
    Kennebunk, ME
    Posts
    292
    Post Thanks / Like

    Does this connector no longer come in the kit?

    Wrapping up dash wiring and looking ahead to the wiper motor install and the associated harness. I don't have the black harness terminal pictured below. From reading the wiper instructions and the kit hardware, i'm assuming I'm just supposed to use 5 blade terminal connections inside the white connector that is part of the wiper motor? My kit doesn't list the black connector, and it wasn't in the motor package. just checking, as it's a fairly unique connector shape - not something I'd be able to buy online.

    IMG_2631.jpg

  2. #2
    Senior Member
    Join Date
    Aug 2021
    Location
    Moyock, NC (OBX/Hampton Roads)
    Posts
    394
    Post Thanks / Like
    Mine did not come with that. I used spade connectors like pictured in the wiper instructions.
    MK4 Complete Kit #10315 / Coyote G3 / TKX / 427 HardTop
    Build Thread Production Date: 2/26/22, Registered 5/19/22, Graduated 3/1/2023

  3. #3

    Join Date
    Feb 2011
    Location
    Norton, MA USA earth
    Posts
    3,325
    Post Thanks / Like
    ********** among others carries it. Be prepared to be stunned. Quite expensive for what it is.
    Mike

  4. #4
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    It didn't come with any kit that I'm aware of, and isn't really needed. Insulated spade connectors work fine. As stated above, it is available from multiple sources if you want it.
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  5. #5

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,556
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Papa View Post
    It didn't come with any kit that I'm aware of, and isn't really needed. Insulated spade connectors work fine. As stated above, it is available from multiple sources if you want it.

    I bought the connector from Finish Line, but ended up doing Papa Dave's solution.

  6. #6
    Senior Member mmklaxer's Avatar
    Join Date
    Aug 2015
    Location
    Kennebunk, ME
    Posts
    292
    Post Thanks / Like
    Thanks all. Spade connectors it is!

  7. #7
    PaulProe's Avatar
    Join Date
    Feb 2011
    Location
    Manchester, MO
    Posts
    107
    Post Thanks / Like

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor