WP_000283.jpgHi - Don Galley here, first time poster... I am up to the point in my build where I am doing the wiring. Building 33 hotrod, coyote engine with Tremec T56 transmission. So far so good. Two questions: 1) what do I do with the brown and red wires that are part of the chassis wiring? See picture ...282 below. I am using the yellow wire from the coyote harness to attach to the alternator. 2) What do I do with the pink&grey and yellow&green wires bundled with the yellow wire (now attached to the alternator) that are part of the coyote wiring harness? See picture ...279 below.

WP_000279.jpgWP_000283.jpg