Mk IV 10.5 Tire Hitting Quad Shock

[rrisdon]

Attached is a picture of my rear tire using Factory Five 10.5" X 17" Hallibrand replica. The rear end is a solid axle 8.8 from a '96 Cobra. The tire size is 315/35 R17 Sumitomo. As you can see the quad shock is hitting the tire. Does anyone have any suggestions?Rear tire to Quad Shock Compressed.jpg

[frankeeski]

Turn the quad shock around to face the other direction. Another thing is you said a 96 rear end with 17 X 10.5 FFR wheels. This combination will most likely not fit within the fender-wells when you try to fit the body. That rear end is quite a bit wider then the standard 87-93 Mustang rearend. So you can either change out the axles or change the wheel offset. Sorry.