Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
The wilwood rep at the HB show said that power bleeders should not be used when bleeding the brakes with their master cylinders. He recommended the traditional method that Wallace outlined.
Even though their website says power and vacuum bleeders can be used.
https://www.wilwood.com/m/techtip/Te...spx?id=10&no=1
-
Has anyone figured out how to isolate the mcs? Can i block the rod on one to prevent its movement and then bleed to other and check for a hard pedal?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor