FormaCars

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7

Thread: 5 inches of ride height

  1. #1
    Member
    Join Date
    Nov 2013
    Posts
    40
    Post Thanks / Like

    5 inches of ride height

    I am not sure why, but I have 5 inches of ride height, in the front, with no compression in the springs at all.

    I am not sure what I did wrong, if anything, or if this is how it is supposed to be.

    My car is # 79, so it is one of the new ones.

    Everything looks like it is supposed to, from the pictures in the instruction manual.

    Rob

  2. #2
    Senior Member billjr212's Avatar
    Join Date
    Feb 2011
    Location
    Frankfort, IL
    Posts
    734
    Post Thanks / Like
    79 would be a fairly old one. Did you buy the kit unfinished from someone else or is that a typo?

    On the ride height, a picture is worth a thousand words. Are you at full weight with body on?

  3. #3
    Moonlight Performance
    Hindsight's Avatar
    Join Date
    May 2014
    Location
    Atlanta
    Posts
    3,402
    Post Thanks / Like
    Quote Originally Posted by billjr212 View Post
    Are you at full weight with body on?
    That's my bet: No body yet.

  4. #4
    Senior Member Canadian818's Avatar
    Join Date
    Nov 2011
    Location
    Edmonton, Alberta
    Posts
    1,378
    Post Thanks / Like
    I just encountered this with mine, your tires might be binding up a bit as you lower it holding the car up. Just stand on the front subframe and bounce it a bit to push them out and settle. Not having a battery or body work up front doesn't help either.
    Adam _____ Instagram @PopesProjects____ YouTube Channel
    818 SRX - #91
    Arrived 01/02/2014
    First Start 10/31/2016
    First Drive 05/22/2017
    Registered 10/25/2019 BRAP818

  5. #5
    Member
    Join Date
    Nov 2013
    Posts
    40
    Post Thanks / Like
    Quote Originally Posted by billjr212 View Post
    79 would be a fairly old one. Did you buy the kit unfinished from someone else or is that a typo?

    On the ride height, a picture is worth a thousand words. Are you at full weight with body on?
    I will take some pics.

    I am the original purchaser, been working on it for over two years. It is complete, registered, and drives. I have put about 100 miles on it so far, maybe more. The suspension never felt right and i am going over it, trying to figure out why.

  6. #6
    Senior Member Frank818's Avatar
    Join Date
    Jun 2013
    Location
    QC, Canada
    Posts
    5,732
    Post Thanks / Like
    I struggle to get 4.5" at the front with no body, no coolant and no AWIC tank water (3gals). Any higher and the springs don't touch the perch when I lift the car, so I don't know how you ended up at 5". What tire sizes you got up front? I run 215/40/17.
    Frank
    818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
    Go-karted Aug 5, 2016 - Then May 19+21, 2017
    Tracked May 27/July 26, 2017
    Build time before being driveable on Sep 27, 2019: over 6000h
    Build Completed Winter 2021

  7. #7
    Senior Member D Clary's Avatar
    Join Date
    Aug 2013
    Location
    Santa Rosa CA
    Posts
    407
    Post Thanks / Like
    Try loosing the lower control arm bolts and tightening them with the weight on the car.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor