BluePrint Engines

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: July 9th run....

  1. #1

    Super Moderator
    Ray's Avatar
    Join Date
    Feb 2011
    Location
    La Mesa, California
    Posts
    1,249
    Post Thanks / Like

    July 9th run....

    Saturday July 9th run:

    Meet at the Cal-Trans office on Olive Ave. east of SR-99 between 9:30-10:00.

    Leave for Bravo Farms (http://www.bravofarms.com) at 10, should arrive about 10:30 (or so) For those of you in the south Valley area, just meet us at Bravo Farms.

    Lots of stuff to do and look at (http://www.yelp.com/biz/bravo-farms-traver) There is a restaurant (burgers etc.) with seating in a cool shaded area.

    Should be fun.

    Ray
    I'm not getting gray, I'm adding chrome....

    “Under-steer is when you hit the wall with the front of the car and over-steer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you.”
    -- Jacques Schnauzee "World Famous Racecar Driver"

    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower."--Mark Donohue

  2. #2
    Member John Card's Avatar
    Join Date
    Feb 2011
    Location
    Visalia, CA
    Posts
    84
    Post Thanks / Like
    That's just after I get back from vacation - I can make that one! Only 15 minutes away too! Too bad I probably won't have the coupe back (or running) though. I'll either bring the Mustang or my bike.

  3. #3
    Senior Member 68GT500MAN's Avatar
    Join Date
    Feb 2011
    Location
    Fresno, CA
    Posts
    1,808
    Post Thanks / Like
    John, it will be great if you can make it.
    Doug

  4. #4
    Member John Card's Avatar
    Join Date
    Feb 2011
    Location
    Visalia, CA
    Posts
    84
    Post Thanks / Like
    Quote Originally Posted by 68GT500MAN View Post
    John, it will be great if you can make it.
    Doug
    How's your motor doing?

  5. #5
    Senior Member 68GT500MAN's Avatar
    Join Date
    Feb 2011
    Location
    Fresno, CA
    Posts
    1,808
    Post Thanks / Like
    The verdict is still out. I made it home (no smoke), replaced the glazed alternator belt and took it out for a spin down 41 towards Ave 12. There is definatly a noise comming from (?) and the oil temp is still too high for my liking.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

FFMetal

Visit our community sponsor