I’m dedrick from Houston building my first ffr 818c. I can not locate the 5mm bolts that FFR says is included. My question: can anyone give me more information on these bolts do I can go out and buy some to keep my build moving?
Thanks in advance
Visit our community sponsor
I’m dedrick from Houston building my first ffr 818c. I can not locate the 5mm bolts that FFR says is included. My question: can anyone give me more information on these bolts do I can go out and buy some to keep my build moving?
Thanks in advance
Build Website: www.818coupe.com
Subscribe Link: https://feedburner.google.com/fb/a/m...&loc=en_US
My donor used nuts. The studs are part of the honor tank. The documentation identifies 5mm bolts that are supplied but I have not located them.
Assuming you're talking about the ones that go around the flanges on top of the tank, they came in a small bag attached to the FFR fuel tank if I recall correctly. They were not in the pre-packaged nuts and bolts.
They are very small silver flange heads, and it's quite possible they fell off somewhere between the fuel tank manufacturer, factory five and your garage.
Extremely helpful response. I'll follow up with Factory Five and I have looked all over the box the tank came in and assumed I overlooked them in the fastener box.
Thanks again Phil1734
I couldn't find them with my kit either.
I ended up bailing and ordering a Boyd tank so it didn't matter to me in the end.
Mine were inside the tank, I believe...
I did not look inside. David from FFR sent me the specs. I bought them today and ready to install the tank now.
Just so it’s out there the bolts are: 5m-0.8 x 10mm