Boig Motorsports

Visit our community sponsor

Thanks Thanks:  126
Likes Likes:  105
Page 20 of 20 FirstFirst ... 10181920
Results 761 to 800 of 800

Thread: Edwardb’s Gen 3 Type 65 Coyote Coupe #59 Build: Paint Done. It’s Home!

  1. #761
    Senior Member RJD's Avatar
    Join Date
    Jan 2017
    Location
    Northern, VA
    Posts
    280
    Post Thanks / Like
    I see more trophies ahead. Stunning!
    MKIV complete kit w/powder coating and cut outs, serial #9189 delivered 10/10/17, first start - 10/5/18, Blueprint 306 w/Holley Sniper EFI, TKO 600, power steering, Breeze fan shroud, trunk cubby, & engine compartment battery kit, CNC brake reservoirs, RT turn signal & gas pedal, mechanical throttle linkage, METCO safety loop, GASN side pipes, drop trunk, dual chrome roll bars, vintage gauges, vinyl dash w/ glove box, custom center console, cup holders, and front speaker boxes.

  2. Thanks edwardb thanked for this post
  3. #762
    Member UpNorth's Avatar
    Join Date
    Jan 2018
    Location
    Quebec City
    Posts
    90
    Post Thanks / Like
    Paul,

    It looks amazing. I really like it!

  4. #763
    Junior Member
    Join Date
    Jun 2018
    Posts
    18
    Post Thanks / Like
    All I can say is WOW!! Absolutely beautiful.

  5. Thanks edwardb thanked for this post
  6. #764
    Junior Member
    Join Date
    Jun 2019
    Location
    Scaggsville MD
    Posts
    12
    Post Thanks / Like
    Stunning. Absolutely stunning. Looks awesome!

  7. Thanks edwardb thanked for this post
  8. #765
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    2,353
    Post Thanks / Like
    That color is perfect!
    There are 10 types of people in this world;
    those who understand binary and those who don't.

    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754

  9. Thanks edwardb thanked for this post
  10. #766
    Member Kool AC's Avatar
    Join Date
    Sep 2018
    Location
    Armada, Mich
    Posts
    65
    Post Thanks / Like
    Looking good Paul. Love the color!
    MkIV Complete Kit #9423, Coyote, TKO-600, IRS Torsen 3.73, Wilwoods, DA Konis - Delivered 9/14/18

  11. Thanks edwardb thanked for this post
  12. #767
    Junior Member
    Join Date
    Aug 2018
    Location
    Chicago
    Posts
    27
    Post Thanks / Like
    Hi Paul, I wandered over here from the GTM/818 builds I normally keep tabs on and came across your build thread. Just wanted to say that your paint job is absolutely stunning. That red really, really pops. Can’t wait to see the finished product!

    - Jake

  13. Thanks edwardb thanked for this post
  14. #768
    Jazzman's Avatar
    Join Date
    Jan 2014
    Location
    Scottsdale, AZ
    Posts
    1,128
    Post Thanks / Like
    Hello Paul -

    I heartily approve of your color choice! Gorgeous red, no stripe, . . . sounds like another car I love!! As always you set the standard for craftsmanship. Congratulations on another perfect build. I also agree that there are likely some more trophies coming your way.

    Kevin
    (aka Jazzman)
    Jazzman

    MKIV #8745 "Flip Top" Roadster, Custom Tilt front, Coyote Engine, Tremec TKO600, Custom Interior. Best of Show winner, Huntington Beach Cruise In 2018.

    1967 Ford Mustang Coupe build thread updated 12/04/2019

    Roadster Frame Dolly Plan

  15. Thanks edwardb thanked for this post
  16. #769
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like
    Quote Originally Posted by Jazzman View Post
    Hello Paul -

    I heartily approve of your color choice! Gorgeous red, no stripe, . . . sounds like another car I love!! As always you set the standard for craftsmanship. Congratulations on another perfect build. I also agree that there are likely some more trophies coming your way.

    Kevin
    (aka Jazzman)
    Thanks Kevin. Good to hear from you. I certainly remember the color of your Roadster. But didn't remember it didn't have stripes. Cool!
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  17. #770
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like

    Wet Sanding / Polish Happening

    Can't have too many pictures, right? Wet sending and final polish happening. Color looks even better out of the booth as expected. Maybe home this week??? Hope so.







    Last edited by edwardb; 12-02-2019 at 03:06 PM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  18. Likes GoDadGo, ydousurf liked this post
  19. #771

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    3,701
    Post Thanks / Like
    Blog Entries
    1
    Soon This Car Will Be Winning Awards!

    Many Of Them I Am Certain!

    Well Done!

  20. Likes ydousurf liked this post
  21. #772
    Member ydousurf's Avatar
    Join Date
    Feb 2019
    Location
    Greality, Colorado
    Posts
    49
    Post Thanks / Like
    The car looks awesome, Paul! And the color is a such beautiful red - love it! No doubt, you'll be taking home some future trophies to the garage.
    Dj

  22. #773
    Jazzman's Avatar
    Join Date
    Jan 2014
    Location
    Scottsdale, AZ
    Posts
    1,128
    Post Thanks / Like
    The next obvious question is what's next for the incomparable EdwardB? I mean after you take all your victory laps, awards at multiple shows, etc. Is Mrs. EdwardB going to give you the nod to do yet another one or do you have other plans to fill your time? Whatever you do, I am quite sure you will exceed all expectations. May whatever it turns out to be be a joy for you! All my best!

    Kevin
    Jazzman

    MKIV #8745 "Flip Top" Roadster, Custom Tilt front, Coyote Engine, Tremec TKO600, Custom Interior. Best of Show winner, Huntington Beach Cruise In 2018.

    1967 Ford Mustang Coupe build thread updated 12/04/2019

    Roadster Frame Dolly Plan

  23. #774
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like
    Quote Originally Posted by Jazzman View Post
    The next obvious question is what's next for the incomparable EdwardB? I mean after you take all your victory laps, awards at multiple shows, etc. Is Mrs. EdwardB going to give you the nod to do yet another one or do you have other plans to fill your time? Whatever you do, I am quite sure you will exceed all expectations. May whatever it turns out to be be a joy for you! All my best!

    Kevin
    Thanks for the generous comments. Our plan is to drive both the Roadster and the Coupe next season and get our impressions of each. Plus several projects here around the house I need to spend some time on. Some finishing in the basement, new siding on the garden shed, the usual glamorous projects. As for another build, we don't have room or a reason to add another to the garage. So a decision would be necessary before starting a new build. Planning to attend the 25th Anniversary Open House next summer at Factory Five and might just sneak a peak at the new super car they've been talking about. We'll see what happens from there. But for now, need to push this one across the finish line. So back to the current build.
    Last edited by edwardb; 12-02-2019 at 08:36 PM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  24. #775
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like
    Doesn't look like I'll get the Coupe back in my garage workshop this week. But as of today, promised for early next week. Final wet sand and polish is happening on the main body parts. Then a couple small parts to finish up (spoiler, mirrors, engine cover) then it's mine. Not anxious or anything. For those that haven't seen the process in detail, it's pretty crazy.

    Base coat and clear in the booth (picture posted previously). This is where most production cars stop. If done properly, of course can be very nice. But the next steps take it to the next level that most of us are going for and typical for these builds:



    Wet sanded with progressively finer paper until dead flat. A messy process:



    Wet sanding done. A little scary looking, unless you're going for the flat or satin look, which I'm not:



    Then polished, typically with three different grades of pads and compounds. Repeat all over until done.

    Last edited by edwardb; 12-04-2019 at 10:42 PM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  25. Likes FF33rod liked this post
  26. #776

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    3,701
    Post Thanks / Like
    Blog Entries
    1
    Dang Sir Paul,

    I just got home from work doing stupid long hours & you keep building cars.
    This One Will Truly Be Your Best Build Ever!
    Dang that 5:00 alarm will come early.
    Have a great evening.

    Steve

  27. Likes edwardb liked this post
  28. #777
    Junior Member
    Join Date
    Dec 2019
    Posts
    3
    Post Thanks / Like
    That color and paint scheme are just sick. Cannot wait to see this thing finished. Now I have to go talk to the wife about building a bigger garage....LOL.

  29. Thanks edwardb thanked for this post
  30. #778
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like

    Coming Home Soon

    Visited the shop today. Getting close now. They said should be ready for pickup on Wednesday. Main body polish is done with just minor clean-up remaining. Nose piece and doors also getting final details. Mirrors and spoiler are painted just need polishing. Engine cover was being painted when I was there. These pictures aren't a lot different than ones posted previously, but here they are FWIW. Pretty sure I like it.





    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  31. #779
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    2,353
    Post Thanks / Like
    Beautiful!
    There are 10 types of people in this world;
    those who understand binary and those who don't.

    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754

  32. Thanks edwardb thanked for this post
  33. #780
    Senior Member
    Join Date
    Feb 2011
    Location
    Chapel Hill, NC
    Posts
    1,973
    Post Thanks / Like
    Paul-

    I go out of town for a little bit, come home and look what I missed! WOW, just WOW!! She looks beautiful, and such a great color choice. I Also like the treatment on the rear of the car; I like stripes in general, but I like how this works!

    Thanks as always for sharing your progress, and good luck wrapping things up! I know you are looking forward to getting things finished, but I have to confess... so am I!

    Awesome job!!

    Regards,

    Steve

  34. Thanks edwardb thanked for this post
    Likes edwardb liked this post
  35. #781
    Member
    Join Date
    Aug 2017
    Location
    Michigan
    Posts
    77
    Post Thanks / Like
    Looks fantastic Paul!

  36. Thanks edwardb thanked for this post
  37. #782
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like

    Paint Done. Itís Home!

    Drove to the shop today and brought the Coupe home. First time out for the new SE and worked great. The Coupe actually fits. Snowing off and on, and the coldest day of the year so far with the wind chill. But we got it done. Huge thanks to my friend Greg for keeping me company and lending a hand. The Coyote started right up after sitting there for two months (big surprise) and had no issues driving it in and back out of the trailer. Needless to say, I’m really pleased with the paint. Should be since a Coupe isn’t cheap to paint as I’ve now found out. Especially to this level. But it’s done and that’s behind me. It’s a little dusty but not terrible. Tomorrow will get it up on the lift, cleaned up a bit, and start final assembly. Need to get it far enough along to take some decent pictures for my Autorama submission. Then completely done by the end of February for the show. After that, will start the title and registration process so it’s ready to drive by spring.

    First couple pictures are at the shop. Bolted on the prototype side pipes back and put the nose back on. First time it had been together since early body work. Drew its first crowd. Looks amazing. Leaving the doors off until the interior is done. Way easier to work on plus helps prevents any damage.





    Couple hours later, unloaded and safely back in the home shop. The sun was shining a bit when we loaded it onto the trailer. The color looks a little brighter and really pops in the sun. These pictures in general are a bit darker than it looks in natural light and especially in the sun. But you get the idea. The engine cover turned out great and does the best it can to clean up that busy Gen 3 Coyote engine compartment.









    Tomorrow will start digging in.
    Last edited by edwardb; 12-11-2019 at 11:48 PM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  38. Thanks Physasst thanked for this post
  39. #783
    Junior Member
    Join Date
    Dec 2019
    Posts
    3
    Post Thanks / Like
    Wow....just wow. Stunning.

    Mike

  40. Thanks edwardb thanked for this post
  41. #784
    Senior Member delta0014's Avatar
    Join Date
    Jun 2019
    Location
    Atlanta, GA
    Posts
    153
    Post Thanks / Like
    Looks incredible.
    25th Roadster #12 of 25
    Gen 3 Coyote
    TKO 600 mid-shift

    BUILD

  42. Thanks edwardb thanked for this post
  43. #785
    Senior Member wareaglescott's Avatar
    Join Date
    Apr 2016
    Location
    Auburn, AL
    Posts
    1,980
    Post Thanks / Like
    Spectacular Paul! Congrats on getting it home.
    Cant wait to see a group shot with the roadster. Gonna be quite the pair!
    MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
    Build Thread http://thefactoryfiveforum.com/showt...e-build-thread
    PHIL 4:13 INSTAGRAM - @scottsrides

  44. Thanks edwardb thanked for this post
  45. #786
    Senior Member HiggyMK4#9579's Avatar
    Join Date
    Dec 2017
    Location
    Southern Ontario
    Posts
    278
    Post Thanks / Like
    I know where everyone's having coffee this Saturday!!
    Picked kit up on 4/3/19
    Build plan 351C, 3 link, 15's

  46. #787
    Senior Member delta0014's Avatar
    Join Date
    Jun 2019
    Location
    Atlanta, GA
    Posts
    153
    Post Thanks / Like
    I would be curious to hear your thoughts on the Coupe vs Roadster build when it's all done.
    And your thoughts, maybe after the summer driving season, on your likes/dislikes about each one or which keys you reach for the most.
    25th Roadster #12 of 25
    Gen 3 Coyote
    TKO 600 mid-shift

    BUILD

  47. #788

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    3,701
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by HiggyMK4#9579 View Post
    I know where everyone's having coffee this Saturday!!
    At the office working; Oh, you Mean Sir Edwardb & his band of Merry Men!

    Paul,

    Man You Do Phenomenal Work & Obviously Picked A Great Paint Shop Too!
    .....Another Award Winner Is About To Graduate & Collect Some Well Deserved Trophies!

    Steve
    Last edited by GoDadGo; Yesterday at 09:07 AM.

  48. Thanks edwardb thanked for this post
  49. #789
    Senior Member
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    316
    Post Thanks / Like
    Looking great. I like the half white on the back, I toyed with doing silver but in the end decided not to. I might have missed it but what is the color?? It is hard to tell for sure on a computer but it looks close to mine, a little lighter red I think.
    David W
    Mkll 4874 built in 2004
    Gen 3 coupe #16 registered 2018 painted 2019

  50. Thanks edwardb thanked for this post
  51. #790
    Member
    Join Date
    Aug 2018
    Location
    Mead, CO
    Posts
    57
    Post Thanks / Like
    Amazing! Incredible! You have really set the bar for Coupe builds. I have learned so much from following this thread, thank you !

  52. Thanks edwardb thanked for this post
  53. #791
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like
    Quote Originally Posted by David Williamson View Post
    Looking great. I like the half white on the back, I toyed with doing silver but in the end decided not to. I might have missed it but what is the color?? It is hard to tell for sure on a computer but it looks close to mine, a little lighter red I think.
    David W
    Thanks for all the encouraging comments guys. It really is a relief getting the Coupe home. I don't know why, but I stress too much when it's at the paint shop. Worried I guess about how it's going to turn out, will I like it, how much longer will it take, miss working on it, etc. It was a couple days over two months, almost exactly what they promised. I don't how some of you wait the durations I hear about sometimes. But all that's behind me now. So starting to dig in for the final steps.

    The color is Ford Red Candy 2, code RZ, which is technically a tri-coat. It's the same color I requested for my current Roadster, painted by the same shop. For the Roadster, they were using Standox paints and applied as a tri-coat. For the Coupe, now several years later, the shop has switched over to Sikkens for all their paint work. Their Sikkens dealer mixed the color as a standard base coat/clear coat. Saved some money for both material and application, and far easier to touch up. Sitting next to the Roadster now, they're very close. Of course both pop quite a bit more in natural light and especially in bright sunlight.

    Quote Originally Posted by delta0014 View Post
    I would be curious to hear your thoughts on the Coupe vs Roadster build when it's all done.
    And your thoughts, maybe after the summer driving season, on your likes/dislikes about each one or which keys you reach for the most.
    Have some pretty clear thoughts about the build at this point. It's been a fun build, but a bit challenging in a couple ways. Mostly just getting the body to fit the way I wanted plus I've found it's more expensive to paint. I pushed things a bit being early with the Gen 3 Coyote. The Coupe does have a little more complication with heat and A/C (almost mandatory IMO) plus the interior is more complicated than the Roadster, which I didn't make any easier by doing a bunch of custom stuff. But for the most part, the chassis, suspension, sheet metal, etc. is very similar to the work on the Roadster. In the end, don't regret a single decision I made and don't know that it's any harder to build than a Roadster. But I would definitely say it's somewhat more complicated and also requires a bigger budget.

    As for comparison driving, yeah that will wait until next season. I'm expecting it to be very similar to our Roadster since many of the components are the same with the same options (Coyote, IRS, Wilwood, etc.). But with a bit more creature comforts being enclosed. Will report back when the time comes.
    Last edited by edwardb; Yesterday at 11:27 AM.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  54. Likes FF33rod liked this post
  55. #792
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    4,589
    Post Thanks / Like
    Looks nice Paul! They did a good job faking the 3 stage. Looking forward to seeing it with glass and all back together!

  56. Thanks edwardb thanked for this post
  57. #793
    Senior Member
    Join Date
    Oct 2016
    Location
    Fayetteville WV
    Posts
    256
    Post Thanks / Like
    Amazing just AMAZING!!!!!!!!!!!
    1972 Corvette Stingray 350 c.i. Manual Steering & Brakes
    2003 H-D Softail Deuce 88 c.i. TwinCam
    Gen 3 Coupe Dreamer

  58. Thanks edwardb thanked for this post
  59. #794
    Member
    Join Date
    Jun 2015
    Posts
    96
    Post Thanks / Like
    Now he just has to decide which car he's bringing to London. Wouldn't we all love to have that problem!!!!! As usual Paul, Perfection.
    Building FFR9457. 351 Windsor, TKO600, 3.73. Fitech EFI. Russ Thompson throttle pedal, turn signal, and trunk pan. Carbon Fiber dash with Speedhut Revolution gauges. Paint this winter by Jeff Kleiner.

  60. Thanks edwardb thanked for this post
  61. #795
    Junior Member
    Join Date
    Oct 2019
    Posts
    21
    Post Thanks / Like
    looks super ,thanks for all your post im sure i will go back to see yours as im building mine

  62. Thanks edwardb thanked for this post
  63. #796
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    6,432
    Post Thanks / Like
    Quote Originally Posted by Sdonnel View Post
    Now he just has to decide which car he's bringing to London. Wouldn't we all love to have that problem!!!!! As usual Paul, Perfection.
    Hey Scott. Unless something changes that I'm sure not expecting, bringing the Coupe to London this year. For the past two years, I've been asked a bunch of times "Where's the Coupe?" Kept promising it for 2020, and plan to make good on that.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread and Video
    Build 4: Gen 3 Type 65 Coupe #59. Gen 3 crate Coyote. Delivered 12/2/2017. #59 Coupe Build Thread

  64. #797
    Member Jkviper's Avatar
    Join Date
    Dec 2017
    Location
    Central Jersey
    Posts
    59
    Post Thanks / Like
    Outstanding job Paul. Your build is something to be very proud of. I really enjoyed watching this come together. Just amazing!

  65. #798
    Member
    Join Date
    Jun 2015
    Posts
    96
    Post Thanks / Like
    We're looking forward to seeing it in person in London, if not before at a club event. I'll put money on the fact that your coupe will be next to the FFR trailer. Time will tell who gets their roadster to share the display with you. Be careful during final assembly. No scratches allowed.
    Building FFR9457. 351 Windsor, TKO600, 3.73. Fitech EFI. Russ Thompson throttle pedal, turn signal, and trunk pan. Carbon Fiber dash with Speedhut Revolution gauges. Paint this winter by Jeff Kleiner.

  66. #799

    Average Moderator
    Garry Bopp's Avatar
    Join Date
    Feb 2011
    Location
    Covington, Georgia
    Posts
    1,127
    Post Thanks / Like
    Paul,

    Look forward to seeing this beauty at LCS!

    Garry
    I sure miss my coupe!

    F5R1004503SP 2004 Challenge Car, 331 Stroker

    Coupe # 031, 422" Windsor stroker by Southern Automotive (Dash autographed by Peter Brock)***SOLD***
    Unique 427 Roadster, 482" Aluminum FE by Southern Automotive***SOLD***

  67. #800
    Junior Member
    Join Date
    Jun 2018
    Posts
    18
    Post Thanks / Like
    Paul, it is stunning. I can’t wait to see it completed. You have done a masterful job. I have learned so much from you and I thank you for that. Gary

Page 20 of 20 FirstFirst ... 10181920

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Flat Irons Tuning

Visit our community sponsor