Is this the correct switch?

[cfriedman67]

I am installing the RT turn signal and have the RF wire harness. I ordered the base kit so I do not have all the extra switches that come with the complete kit. F5 sent me this but I don’t believe it is the correct switch. Can someone confirm. I understand that if I use diodes I need a STSP and if not using diodes I need an STDP. Is the switch I have either one of these?

Thanks Craig

[michael everson]

that is not a STDP switch. They sent you the switch they use for directionals.
Mike

[cfriedman67]

thanks Mke

[Papa]

I don't have the Russ Thompson setup in my car, so I'm asking out of curiosity. Doesn't the Russ Thompson setup replace the turn signal switch?

[Jeff Kleiner]

Craig,
You have shown the ON/ON switch that is used for the headlight high and low beam selection.

Papa,
Yes, Russ' setup replaces the turn signal toggle switch.

Jeff

[alv69]

I am installing the RT turn signal and have the RF wire harness. I ordered the base kit so I do not have all the extra switches that come with the complete kit. F5 sent me this but I don’t believe it is the correct switch. Can someone confirm. I understand that if I use diodes I need a STSP and if not using diodes I need an STDP. Is the switch I have either one of these?

Thanks Craig

I used a regular on off switch with diodes purchased from ebay, easy to do.