What is the source for the emblems that go in the steering wheel insert? It appears that the diameter needs to be about 2 3/8". Those sold by ********** are 3".
Visit our community sponsor
What is the source for the emblems that go in the steering wheel insert? It appears that the diameter needs to be about 2 3/8". Those sold by ********** are 3".
assuming you don't want to use the FFR one that comes with the kit?
FFR 1879, Blown DSS 306,REDLINE management, VeryCoolParts Tuned 460RWHP
FFR 818S, The Flash, Chassis #5, 2.0L, LSD, Electromotive TEC-S, VCP Tuned, 278RWHP 265 RWTQ
FFR 6651, Green Lantern, 408W Crate, Hellion 66mm Turbo, JGS Waste gate / Blowoff valve, Tec-GT management, VCP Tuned, 575 RWHP, 690 RWTQ
FFR 8335, Black Mamba, 289 FIA CSX 2001 tribute car, 347, 48 IDA webers, VCP Tuned, 311 RWHP 386 RWTQ, 3-link, Trigo's
FFR 0004, Gen 3 , Hawk Coupe, Coyote twin turbo, 683 RWHP 559 RWTQ, IRS, VCP Tuned. "not too shabby"
US ARMY Maintenance Test Pilot (CW4 Retired)
Probably need a different emblem backing plate, that inserts into the steering hub. It might come with some of the ********** emblems.This is what they say on their advert.
"This Cobra OEM style emblem is Red White & Blue made of acrylic and is made to fit into the center of our 6 bolt steering wheels.
This utilizes a billet backing plate that press fits into the center of the steering wheel and a high quality metal backed emblem. Diameter: 3.25" OD.. 1 7/8" where it presses into steering wheel.
FFR6803RD, MK 3.1, 302 EFI, fr/rr disc brakes, WC-T5, c/w Hurst Competition Plus shifter, 3 link rear, Koni adjustable coil over shocks, dual roll bars, BBK 4-4 headers, 3.55 rear gears, BBK rear lower control arms c/w poly bushings. Ivy Green Metallic Arrived-02/08, On road 09/2010