FormaCars

Visit our community sponsor

Thanks Thanks:  10
Likes Likes:  51
Results 1 to 40 of 503

Thread: Wallace18's 35 Hot Rod Pickup

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    East Coast Speed Machines Erik W. Treves's Avatar
    Join Date
    Feb 2011
    Location
    Huntsville, Al
    Posts
    2,105
    Post Thanks / Like
    never mind... I just checked my build pictures again... this is how I had it the first time...



    which didn't work.... yours is correct!

    BTW on mine... the cable holder for the door release in the picture.... the one towards the front of the door (the right eyelet in the picture) was too far fwd (or right as you look at it) on both brackets... hopefully you don't run into any issue... FFR said they were already tracking the issue and have moved the bracket slightly to accommodate the cables correctly.



    the redesigned window came out of this observation.... you will notice how close the window is the back of the door... went back and forth with Jim on this and his thought in the end was to make the window slightly more narrow... i think this will make the window install process WAY easier!
    Last edited by Erik W. Treves; 10-15-2018 at 09:20 PM.
    FFR 1879, Blown DSS 306,REDLINE management, VeryCoolParts Tuned 460RWHP

    FFR 818S, The Flash, Chassis #5, 2.0L, LSD, Electromotive TEC-S, VCP Tuned, 278RWHP 265 RWTQ

    FFR 6651, Green Lantern, 408W Crate, Hellion 66mm Turbo, JGS Waste gate / Blowoff valve, Tec-GT management, VCP Tuned, 575 RWHP, 690 RWTQ

    FFR 8335, Black Mamba, 289 FIA CSX 2001 tribute car, 347, 48 IDA webers, VCP Tuned, 311 RWHP 386 RWTQ, 3-link, Trigo's

    FFR 0004, Gen 3 , Hawk Coupe, Coyote twin turbo, 683 RWHP 559 RWTQ, IRS, VCP Tuned. "not too shabby"

    US ARMY Maintenance Test Pilot (CW4 Retired)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

FFMetal

Visit our community sponsor