Anyone know what bolt to use for the lower control arm where it mounts towards the front of the car. There is one per side.
Thanks
Glenn Rathke
Visit our community sponsor
Anyone know what bolt to use for the lower control arm where it mounts towards the front of the car. There is one per side.
Thanks
Glenn Rathke
Use the OEM bolt.
7icAE4C.jpg
Owner/builder - AEM Intakes 818R #85
They don't list sizes but here's the part number for the bolt:
https://parts.subaru.com/p/Subaru_20...901000264.html
and the nut:
https://parts.subaru.com/p/Subaru_20...902350006.html
Owner/builder - AEM Intakes 818R #85
Bolt, M12x1.25x 90 LCA front mount
Nut, M12x1.25 LCA front mount
Bob
Below is my whole list for the lower control arms
2006 Donor Front lower control arms Steel (1pair) 1 EA
80267 box 1 FRONT LOWER SHOCK MOUNT BRACKET. WELDED STEEL 2 EA
80500 box 1 LOWER IFS BRACKET NUT HOLDER, WELDED STEEL 2 EA
25662 box 3 BOLT, M10X1.5MMX35MM Shock Mount 2 EA
80356 box 3 BOLT, M10X1.5MMX40MM Shock Mount 2 EA
2006 Donor Bushing Back of Lower control arms right 1 EA
2006 Donor Bushing Back of Lower control arms left 1 EA
2006 Donor Bolt, M12x1.25x 90 LCA front mount 2 EA
2006 Donor Nut, M12x1.25 LCA front mount 2 EA
2006 Donor washer, back bushing 2 EA
2006 Donor stopper rubber, rear back bushing 2 EA
2006 Donor stopper rubber, front back bushing 2 EA
2006 Donor nut, self locking M14x1.5 back bushing 2 EA
2006 Donor Bolt, Hex M14X1.5X50 -10.9 mount bushing 4 EA
MMC Washer, M14 - Hardened Flat 8 EA
BelMetric Nut,M14X1.5 - Class 10 Nylock mount bush 4 EA
Last edited by Bob_n_Cincy; 02-07-2018 at 03:23 AM.
818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread
Thanks for the parts listing. It is a huge help.
Glenn