Visit our community sponsor
Thanks:
0
Likes:
0
-
Brake Bleeding and Wilwood master cylinders
I am at the point of bleeding my brakes. I am using the Wilwood pedals/MCs with a Tilton remote reservoir. For the life of me I cannot get the plastic top to seal against the master cylinders... Every time I go to bleed the brakes I am sucking in air.
Anyone else run into the same issue?
-
I have the same set up and didn't and don't have a problem bleeding the brakes. What I did have a problem with was getting the banjo fittings to seal up on one of the masters.
-
Banjo... Mine don't have banjos.. the lines go in the front with an adapter for the NPT to flare... Must be a different model. I will mess with it some more..
Thanks!!
-
Ok.. so tried to bleed them and it just leaks from black cap that has the hose.. not even enough pressure to bleed them...
-
Do you have the wormdrive clamp on the cap?
-
Sure do and the o-ring in there too..leaks like crazy trying to bleed the brakes
-
Ok.. so I’m a dope.. I had the o ring in the wrong place... works like a champ now!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor