I've got hydroboost installed for PS and brakes with FF PS Rack, new stock style pump on a 4.6 4v. I've built stainless -6 lines (contributed by blood donation in the process) and am having some hydraulic leaks at the pump and hyrdoboost. The issue is that the AN adapters just don't seal under pressure, heck the one on the bottom of the pump just flat out leaks with a constant drip. I've tried crushable washers, rubber o-rings all with no success. Plan B today is to take the stock fittings to a local shop and have them make an adapter using the stock adapter with a female on the other side that I can plug the AN fittings into. What am I missing?
Thanks,
Vince