Quote Originally Posted by stevant View Post
I mounted my Engine Kill switch right above the transmission tunnel like some, I wanted a switch plate and wanted to play off the switch design itself and my steering wheel spokes. I'm going to polish the aluminum and have it engraved "Locked" for the off position and "Loaded" for the on position. Personal touches here and there......

IMG_3126.JPGIMG_3127.JPG

Also in the process of mounting my CNC triple reservoir bracket. I'm using the Hydroboost setup so one of the fittings on the unit might keep me from mounting the reservoir closer to the firewall. In speaking to Edward B, he also suggested I make sure it's not to close to the front of the car as I would need room for the hood strut. Thanks Paul!! I'll take some measurements but here is what it might look like when completed. Bolts used are temporary.

IMG_3133.JPGIMG_3132.JPGIMG_3131.JPGIMG_3130.JPGIMG_3130.JPG
You're doing some really nice work there, Steve.

Dave