AC Parts Needed

[Shoeless]

Hey guys,

I'm working on putting together a list of the components in support of installing AC in my GTM. I went to GM Parts Direct website and they list all the following for the C5 Corvette AC System. Some are a no brainer to me like compressor, accumulator,... but wanted to confirm if I in fact need them all. Could you confirm if all these items are needed? Looks like some are discontinued, but I'd rather find new than used and run into issues. Thanks.

Condenser PN 52470569
Accumulator PN 1132765
Accumulator Bracket PN 10229475
Compressor PN 89018958
Compressor Bracket PN 12556444
Pressure Hose PN 19213199
AC Tube Front PN 10436323
AC Tube Rear PN 10436322
AC Hose PN 10229474
Pressure Sensor PN 13587697

[beeman]

Do you have the Vintage Air unit? I have one I'm not going to use, I'd give you a good deal on it if you need one.

[Roger Reid]

If I recall correctly, my kit came with the AC hoses and pressure sensor. If not I feel you would be better off buying the hose and fittings separately. Buy a crimp tool and make it fit the way you want.

[Shoeless]

Do you have the Vintage Air unit? I have one I'm not going to use, I'd give you a good deal on it if you need one.

Hey beeman,

Yes I do have the Vintage Air setup, thanks for the offer though.

[Shoeless]

If I recall correctly, my kit came with the AC hoses and pressure sensor. If not I feel you would be better off buying the hose and fittings separately. Buy a crimp tool and make it fit the way you want.

Thanks Roger,

I’ll double check my Vintage Air Box for those. Did I see you post something about a 90 deg adapter to assist with clearance around the Kooks headers? Where did you find it?

Thanks,
Sean

[Roger Reid]

I found several at Hawk Motorsports. They have one for an LS1, LS2, LS3, etc.
http://www.hawksmotorsports.com/lsx-...apter-fitting/

[Shoeless]

I found several at Hawk Motorsports. They have one for an LS1, LS2, LS3, etc.
http://www.hawksmotorsports.com/lsx-...apter-fitting/

Thanks Roger!!!