I keep blowing fuses and all the wires at the plug under dash I found out were switched. How do I remove these type of receptacles?
20201225_123653.jpg
Visit our community sponsor
I keep blowing fuses and all the wires at the plug under dash I found out were switched. How do I remove these type of receptacles?
20201225_123653.jpg
FFR Roadster: Received 11/18/19: BluePrint 427w, TKO600, Glenn's performance fuel system, IRS, Wilwood Brakes, Sniper XFlow and many more
There is a tool that you put into the plug and it will release the clips holding it in place. You could contact Ron Francis and I'm sure they would send you one out. Or you can also get them on Amazon, Summit, etc.
Mk4 20th Anniversary #8690 (#8 of 20) Purchased 8/18/18----Build Started 8/19/18
Build Thread Click Here / Registry Entry Click Here / BluePrint Engines 347ci / TKO600
Carb/Heater/Heated Seats/Cruise Control/Drop Trunk & Battery/Custom Cubby
What you need is a weather pack connector removal tool here's the link from Amazon https://www.racetronix.biz/p/tool-we...EaAqj8EALw_wcB
Last edited by R. Button; 12-25-2020 at 03:23 PM.
Garage guy - just fixed your link to help them find the tool better
Ralph Button
FFR 1436 (PROUD Owner of an Original Mark I)
400,013 miles as of 11/1/2009
417,840 miles as of 8/12/2010
435,021 miles as of 12/19/2011
Now a well broken in 347 engine
523,145 miles as of 7/29/2014
601,165 miles as of 6/1/2018
615,215 miles as of 4/23/2022
"It's not about the destination, it's the about the journey. And where is your journey taking you?"
"... Not all who wander are lost!... --J.R.R. Tolkien
Ralph
Thanks I was having trouble embedding the Livelink.
Richard
Thanks, part is on the way then first start
FFR Roadster: Received 11/18/19: BluePrint 427w, TKO600, Glenn's performance fuel system, IRS, Wilwood Brakes, Sniper XFlow and many more