Miller Customs

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Placement of charcoal filter

  1. #1

    Join Date
    Dec 2017
    Location
    Fairport New York
    Posts
    56
    Post Thanks / Like

    Placement of charcoal filter

    Don't see any reference to the proper placement of the charcoal filter that I received for my roadster build with a coyote engine.
    Anyone have any suggestions?

    IMG_2740.jpg

  2. #2
    Member
    Join Date
    Mar 2017
    Location
    SW Ontario
    Posts
    51
    Post Thanks / Like
    Here's a general system schematic. The physical location doesn't matter too much. The purpose is to capture the hydrocarbon vapors coming from the fuel tank and then to burn them when the engine is running.

    EVAP Schematic.jpg

  3. #3
    edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    4,839
    Post Thanks / Like
    If you're using the crate motor controls pack for your Coyote, the purge valve isn't active. So really no chance to plumb it like the diagram and how it's used in production cars. Best bet is to mount it back toward the tank, with the vent from the tank on the inlet and then open to atmosphere on the other side. Had a similar setup on my Mk3 with an OE charcoal filter like that one.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
    Build 2: Mk4 Roadster #7750. Sold 04/10/2017. #7750 Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. 03 of 20. 2015 crate Coyote, 2015 IRS. Legal 04/18/2017. #8674 Build Thread
    Build 4: Gen 3 Type 65 Coupe #59. Delivered 12/2/2017. #59 Coupe Build Thread

  4. #4
    Senior Member Dave Howard's Avatar
    Join Date
    Feb 2012
    Location
    North Bay, Ontario
    Posts
    449
    Post Thanks / Like
    As stated previously, install the charcoal canister close to the fuel tank and plumb the vent from the tank to the canister. Then leave the other side of the canister open to atmosphere. As for the purge valve, I removed it and the PCV hoses from my Coyote. Installed a couple of K&N filters on the PCV connections on the front of each cylinder head. It helped to de-clutter the engine bay.

  5. #5

    Join Date
    Dec 2017
    Location
    Fairport New York
    Posts
    56
    Post Thanks / Like
    Thanks for the info.

  6. #6
    Senior Member
    Join Date
    Jul 2017
    Posts
    159
    Post Thanks / Like
    had one on my street rod and it worked great, tyrapped it to the top of the gas tank with the hose venting up as high as I could get it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Legend Lines

Visit our community sponsor