I'm using FFR wheels with 15" billboards and want the tires to tuck under fender a little bit. anyone done this? I'm talking to Moser about a 9" but I thing the 8.8 will do the job.....thanks in advance
Visit our community sponsor
I'm using FFR wheels with 15" billboards and want the tires to tuck under fender a little bit. anyone done this? I'm talking to Moser about a 9" but I thing the 8.8 will do the job.....thanks in advance
Narrowed for a roadster, no.
First i would check on offset rims. I dont know if they even make them?
I read somewhere that the 9" is less efficient so uses more HP ??? Be sure to check the pinion lenght to axle center line. No need in making the drive shaft shorter!!
Making an 8.8 axle of any lenght would be easy for Moser. The trick is to be sure on ALL the clearences when moving the tires inboard
Mk3.1 347 AFR 205cc Heads A9L EFI siemens deca 60lb injectors MSD 6AL ignition Vortech V-3 3 Link PS/PB
-- If you can’t fix it with a hammer, you have an electrical problem ! —
Last edited by Papa; 04-07-2018 at 03:59 PM.
My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
(Most viewed Roadster build thread on this forum!)
Delivered: 6/17/2017
First Start: 12/30/2017
Completed: 12/7/2019
Legal: 1/30/2020
Member of the Mile-Hi Cobra Club
Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread