FormaCars

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: A/C/heat bulkhead fittings question

  1. #1
    Senior Member
    Join Date
    Jul 2013
    Location
    Prairieville, Louisiana
    Posts
    973
    Post Thanks / Like

    A/C/heat bulkhead fittings question

    In the vintage air bulkhead fittings, do you use the orings on the heater sides that fit into the fitting? Or are they supposed to seal without any oring? It does seem there where extra in the bags but the ac ones had them installed and coolant ones had none. Plus the end that fits into the bulkhead fittings are shorter on the coolant fittings.
    '33 Hot Rod
    Ordered: 3/25/17. Delivered: 5/6/17. 1st start: 8/24/18

    MK4 Roadster
    Ordered: 7/10/13. Delivered: 8/20/13. Completed: 10/26/15.
    I did everything except spray it. She ain't perfect, but she's mine.

  2. #2
    Senior Member
    Join Date
    Feb 2011
    Location
    Bourne-Cape Cod, MA
    Posts
    808
    Post Thanks / Like
    Use o'rings on all bulk head fittings, both A/C and Heater.
    FFinisher/AKA RE63

  3. #3
    Senior Member
    Join Date
    Jul 2013
    Location
    Prairieville, Louisiana
    Posts
    973
    Post Thanks / Like
    Kinda suspected that. Thank you sir.
    '33 Hot Rod
    Ordered: 3/25/17. Delivered: 5/6/17. 1st start: 8/24/18

    MK4 Roadster
    Ordered: 7/10/13. Delivered: 8/20/13. Completed: 10/26/15.
    I did everything except spray it. She ain't perfect, but she's mine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor