Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 10

Thread: 3/4" bulb weather seal needed

  1. #1
    Senior Member
    Join Date
    Jul 2016
    Location
    Vermilion,OH
    Posts
    230
    Post Thanks / Like

    3/4" bulb weather seal needed

    I'm wrapping up #8955 289 roadster and went to install the side radiator panels, and find I'm 3ft short of the 3/4" bulb seal. Does anyone have any extra they're willing to sell?
    Pete H.

  2. #2
    Senior Member Itchief's Avatar
    Join Date
    Aug 2017
    Location
    Southern WV
    Posts
    376
    Post Thanks / Like
    You can order it by the foot from Mark at Breeze automotive

    Rick
    #8475 Complete Kit Delivered Nov 2014, started Nov 2015, Street Legal Apr 2016, Paint and Interior Completed Aug 2017, 390 BBF, March accessory kit, MSD Atomic EFI and Ready to run, TKO 500 with MidShift kit, hooker headers, 3 link, track lock with 3.55, sway bars, power steering, wipers, heater

  3. #3
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    10,547
    Post Thanks / Like
    Also McMaster. They have all the sizes and varieties. Appears to be the same extact stuff.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
    Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.

  4. #4
    Senior Member
    Join Date
    Jul 2016
    Location
    Vermilion,OH
    Posts
    230
    Post Thanks / Like
    Thanks guys, much appreciated!

  5. #5

    Join Date
    Feb 2011
    Posts
    1,113
    Post Thanks / Like
    Or you can leave it off.

  6. #6
    Senior Member
    Join Date
    Sep 2017
    Location
    Alliston, Ontario, Canada
    Posts
    404
    Post Thanks / Like
    3ft short? I think I only used 8 or 10” per side?

  7. #7
    Senior Member
    Join Date
    Jul 2016
    Location
    Vermilion,OH
    Posts
    230
    Post Thanks / Like
    Ordered from Breeze. Each side needs about 16" on my 289.

  8. #8
    Senior Member CVOBill's Avatar
    Join Date
    Oct 2014
    Location
    Vermilion, OH
    Posts
    440
    Post Thanks / Like
    Pete,
    Sorry I didn't see this yesterday, I believe I have extra from my last build.
    CVOBill
    MK2 #???? Delivered 11/2002, Finished and Titled 6/2003 5.0, T-5, 4-Link, Sold 3/2005
    Hot Rod #304 purchased 5/28/2017 from original owner Unassembled . Titled and plated 8/24/2017 Coyote,
    TKO, 3-Link, Heat, A/C, Electric Power Steering, Convertible top
    MK4 #9524 Picked up 1/18/19 306 Blueprint, T-5, 4-Link, Gas-N Pipes, Heater

  9. #9
    Senior Member
    Join Date
    Jul 2016
    Location
    Vermilion,OH
    Posts
    230
    Post Thanks / Like
    Thanks Bill, have it ordered along with door seal material. Made appt for state inspection on May 7th in Bucyrus, Oh. Getting close!

  10. #10
    Senior Member CVOBill's Avatar
    Join Date
    Oct 2014
    Location
    Vermilion, OH
    Posts
    440
    Post Thanks / Like
    Pete,

    Don't forget that you can get your title and license plates in the same building. You will have to go back to get the VIN plate put on but they will give you a VIN number that day.
    CVOBill
    MK2 #???? Delivered 11/2002, Finished and Titled 6/2003 5.0, T-5, 4-Link, Sold 3/2005
    Hot Rod #304 purchased 5/28/2017 from original owner Unassembled . Titled and plated 8/24/2017 Coyote,
    TKO, 3-Link, Heat, A/C, Electric Power Steering, Convertible top
    MK4 #9524 Picked up 1/18/19 306 Blueprint, T-5, 4-Link, Gas-N Pipes, Heater

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor