FormaCars

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: List of Lubrication Points for Mark IV

  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    80
    Post Thanks / Like

    List of Lubrication Points for Mark IV

    Does anyone have a list of all of the lubrication points on the Mark IV? I should have kept a list as I went along but did not. I have to have a State inspection done and plan to have it lubed at the same time so want to make sure they don't miss anything and I really don't want to have to walk through the manual again to make one.

    Thanks.
    Dan

    Mark IV. Pick up April 1, 2011. Complete Kit, 3 link, 3.31 rear, 347 Stroker with Powerjection III EFI, Tremec TKO600. Build completed March 1, 2014. See build info at : http://www.roadster.mightypirates.com/

  2. #2
    Senior Member
    Join Date
    Oct 2012
    Location
    Tybee Island, GA
    Posts
    505
    Post Thanks / Like
    Here's a video that I did for my car showing the zerk fitting locations. Mines a 3.1, but I'll bet they're similar.

    I hope this helps, and I hope it's right

    https://youtu.be/go-yWbqFVKk
    Dave
    Mk 3.1 - #6882 - 5.0L 302 - FiTech EFI - 3-Link - 3.08 Ratio - 15" Wheels
    Greenhorn and doing the best I can
    My photos are at: My Flickr acct
    Videos are at: YouTube Videos

  3. #3
    Senior Member edwardb's Avatar
    Join Date
    Feb 2011
    Location
    Lake Orion, Michigan
    Posts
    10,545
    Post Thanks / Like
    Excellent video. Front should be the same as the video for all. The rear is going to depend on the suspension. The video shows a 3-link which matches yours. Others will have some differences. I personally haven't seen zerks on any driveshafts from Factory Five. But something to check.
    Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
    Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
    Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.

  4. #4
    Senior Member Big Blocker's Avatar
    Join Date
    Feb 2011
    Location
    Lost Wages, Nevada
    Posts
    634
    Post Thanks / Like
    20 is the right number for a 3-Link rear ended car - just had mine done today in preparation for the 1K miles I'll put on the car this weekend going to the 11th Huntington Beach Cruise-In.

    The count is exactly as Dave video'd (Thanks Dave).

    Paul, I had to add the zerks in my driveshaft, not there from the factory during build.

    Doc
    Last edited by Big Blocker; 04-24-2018 at 08:22 PM.
    FFR3712K (MKII) in Lost Wages Nevada.
    5.0 w/tubular GT-40 EFI, E303 cam, Custom 4 into 4 headers, T5, 3-Link 3.73 rear. Full F5 tubular suspension. Drop Butt mod, Dash forward mod, custom foot box air vents, custom turn signal system. 13" PBR brakes, Fiero E-Brake mod, Flaming River 18:1 rack w/ F5 bump steer kit on Breeze bushings. 17" Chrome Cobra "R's" w/ 275 fronts and 315 rears. MKIV seats. FORD Royal Blue w/ Arctic White stripes.

  5. #5
    Member
    Join Date
    Feb 2011
    Posts
    80
    Post Thanks / Like
    Dave,

    Thanks for the infor and link to your video. That is what I needed. Car was inspected today and now I am ready to get it back on the road once the weather here in NEPA gets better.
    Dan

    Mark IV. Pick up April 1, 2011. Complete Kit, 3 link, 3.31 rear, 347 Stroker with Powerjection III EFI, Tremec TKO600. Build completed March 1, 2014. See build info at : http://www.roadster.mightypirates.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor