Sorry if this was already mentioned but I searched and couldn't find anything. Wondering has anybody had thier supplied the factory five shifter cables modified to be shorter. I see Midwest controls.com has available the pieces need to make or could be used to modify the cables but they need to be crimped on.
FYI I flip the FFR billet (k tuned) shifter around in my center drive build used some universal bell cranks from Speedway Motors (Part # 5501523) to recorrect the throw along with some solid shifter rods and 1/4-28 rod ends to get the linkages into the engine bay. Now I just need the shifter cables to be shortened to around 36".
Might either just order a set of custom push pulls from Cablecrafts.com thier high performance Blue Max series, if I can find a distributor? Or use more soild rods and universals joints from McMaster Carr as shifter linkages and but the connections on the other side of the transmission hum......?
Pics via Instagram user ID biknman69
https://instagram.com/p/BiIBIykAZfBc...2GFIE8_WG-nE0/
image.jpeg
image.jpeg
Thanks
Dave