Visit our community sponsor
Thanks:
0
Likes:
0
-
Hello from Australia
Hi all, I'm Brad from Ballarat in Victoria, Australia.
I've been itching to build a 33 Rod for a few years now and I'm getting close to pulling the trigger. Planning for a pretty well stock build; IRS if finances permit, hardtop and bike fenders, LS3 E-Rod crate motor. My understanding is that the ECU in the E-Rod kit is tuned to comply with California emissions regs, therefore will give me the best chance of passing the IM240 emissions test here.
Getting compliance here is going to be the biggest challenge. After discussions with an engineer, I'm currently reading through aussie regs to try and work out if this is viable. The engineer estimates $5k to get it complianced and along with shipping half way round the world and the falling aussie dollar, it's starting to get $$$.
Would love to hear from any other aussie builders out there regarding their experiences.
-
I suggest you PM Barrel, who built a '33 in Mornington, Victoria, Australia a while back. I haven't seen any recent posts from him, but he used to be very active on the forums.
HTH,
Keith
-
Thanks Keith, Barrel has come up in a few searches so I'll see if I can get in touch with him.
-
Senior Member
Hi Brad. Have sent you a PM.
-
Senior Member
Good day! Good luck on your build. Roger
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor