I need new CV joints for my shortened axles. I have Pin Drive wheels and need to rebuild the axles with new CV Joints... My 3.1 uses the old IRS and I am unable to find just the CV Joints....
Visit our community sponsor
I need new CV joints for my shortened axles. I have Pin Drive wheels and need to rebuild the axles with new CV Joints... My 3.1 uses the old IRS and I am unable to find just the CV Joints....
Pressing the thin pedal on the right is more fun than I ever imagined !!!!
MK 3.1 IRS, 392, TKO 600, Manual Brakes & Steering, Pin Drive 17"
Thanks to Paul for all his help !!!
Have you tried calling FFR to see if they have any laying around?
Mike
What year T bird were the axles from. Probably going to have to buy a complete axle set from the parts store and swap the axles into it. The T birds were the same 89 to 96, HTH, Richard.
Richard Oben FFR builder www.northracecars.com
Need help finishing your project we can help here or at your shop.
FFR GTM #34 first GTM with working AC. 400 hp LS1 w/G50
FFR coupe 3617CP 331 Stack EFI T-5 IRS Cobra brakes, AC/heat.
Both cars by NRC, we can build (and have built) any FFR product.
We also make and sell a ton of great parts for the FFR community.
Brake kits, AC systems, #1 supplier of Team III wheels.
I have two complete halfshafts from a 94 TBird, free if you pay shipping. Cv joints good as far as I know. Pulled them out and didn't need them, have been thinking about tossing them.
I have a set of axles that came with my kit. Never used them. Just collecting dust. Gary 858 272 0808