All,
I am running my fuel/return lines for my Coyote install. I opted to use 3/8" hard stainless lines from the rear to the engine compartment.
I have not yet had a chance to do a initial engine fit. I am hppng I could get some feedback on my planned placement of the ends of the 3/8" stainless lines within the engine compartment.
I am planning to terminate them (i.e. transition to flex lines) on the diagonal support channel on the PS side of the compartment.
Here is a pic (hopefully it posts).
Let me know if there are any fitment concerns and/or any concerns with the proximity to the PS header.
https://www.flickr.com/gp/140380606@N02/w1x267
Thanks in advance,
Mark