Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Front control arms

  1. #1
    Junior Member
    Join Date
    Jun 2019
    Posts
    2
    Post Thanks / Like

    Front control arms

    Has anyone had a problem with the placement of the front control arms, specifically the lower control arm that points toward the engine bay? I am trying to use the bottom holes because I need the clearance for the fenders but the one arm won't go down far enough to get the bolt in. Is it OK to put the other three links in the lower holes and that one link on each side in the upper hole?

  2. #2

    Join Date
    Feb 2011
    Location
    Norton, MA USA earth
    Posts
    3,326
    Post Thanks / Like
    The hotrod I am currently working on was the same way. Use the upper holes
    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor