I have a 1998 Cobra 4.6 DOHC engine on 8740 with a dieted harness by Art Cuesta (he has been very helpful) and a Ron Francis chassis harness. When I tried starting the first time, the engine turned over nicely, I could hear the fuel pump prime, and all the gauges worked fine but the engine would not start. Fuel was not making it to the engine. I replaced the fuel pump assembly but again no start. I remove the fuel line from the gas tank to the fuel filter and it is perfectly clear. I reinstalled the line and tried to pump gas into a bottle from the end of this line. No go. I have a little less than half a tank of gas according to the gas gauge. The inertia switch is OK and the fuel relay is OK. Any idea why the no start?