Installing the Subaru Turbo Heat Shield on a EJ 205

[Rogier]

To install the factory turbo heat shield on the 818 we need the following tools.
Angle grinder or metal saw
10 mm spanner
and most important an engineer's hammer
image_21399.jpg


Start with cutting off the rear right part off the heat shield.
Then use you hammer to reshape the heat Shiel so the indent on the rear left goes completely across the heat shield.
Then use the factory brake to mount it to the exhaust.IMG_0864.jpgIMG_0865.jpg

[Hobby Racer]

and most important an engineer's hammer
image_21399.jpg

That's my favorite tool!

Nice job.