Awesome job, the results are inspirational.
Visit our community sponsor
Awesome job, the results are inspirational.
90B752F6-C446-47A4-B71F-9714DC76011D.jpg E7BB1BAF-2111-4927-9C18-3EAE36A1485E.jpg
Hello all, I hope you are all doing well in these crazy times. I had member ask about what I did under the floor boards of my car so i attached pictures. I used 1/8 inch aluminum cut and bent to go between the round frame and the outside square tubing, it goes from front to back. Also was a nice way to rivet the vertical front “Fire Wall” section to the floor. Gave more depth in the floor boards for my feet. All attached with 1/4 20 rivnuts. The first picture is looking from the back to the front, second picture is looking from behind the front tire to the rear of the car.
Thanks Dan