Please eyeball my rear suspension (IRS)

[cv2065]

Ok, got the spindles and hubs installed this afternoon. As I assemble, all is somewhat straight until I add the toe arm, then things start to get a little "off". I realize that there are a few adjustments that can be made here, but so far, I've only been dealing with the toe arm and need a little guidance.

Here's what the left side looks like with second picture of the toe arm adjustment.

IMG_1180.jpgIMG_1181.jpgIMG_1185.jpgIMG_1184.jpg

Here's the right side....same deal.

IMG_1178.jpgIMG_1179.jpgIMG_1183.jpgIMG_1182.jpg

I tried to get the hub as parallel/centered to the body, and have a little more latitude, but a couple of questions:

1. Does this look jacked up with respect to alignment on all arms?
2. Is my toe arm adjustment too far out?
3. If the toe arm is too far out, are there any other adjustments that I can make to center up the hub?

Thanks FFR team!!