Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
I shorted my steering!
HI
I have a question on the Unisteer power steering. I was putting in my floor panels in when I accidentally cut through the insulation on the 2 main wires to the battery and the steering. I rerouted and replaced the wires I shorted out. Now no power steering LED light. I obviously caused damage but I am not sure where to look to fix this.
Is there a fuse in the controller or did I burn this up? Any ideas where to start. What ever damage I did I need to fix.
I did go kart the 33 and other than the steering the car is ready for body. Any thoughts on fixing this would be appreciated.
TomH33
-
Are you sure the 12 volt feed to the unisteer box is present, or maybe the fuse that supplies power to the box is blown?
I did take the cover off mine many months ago to see what was inside, think I saw a fuse inside but I'm not 100% certain.
-
Senior Member
Thanks!!
Got it taken care of, works again.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor