Hey everyone,

Just wanted to make a post about our truck. Our build sort of happened quickly and I didn't have much time to start posting about it from the beginning but figured I would share some of the build with everyone now. Some of you may have already seen the truck in a post FFR did a few weeks ago when we attended LS Fest in Kentucky and were part of the Procharger booth display. The journey for us started towards the end of May. We were one of the final beta builders to receive a kit and we quickly hit the ground running. First task was to get an assembled roller ready for display in FFR booth at Barrett Jackson at Mohegan Sun in CT for June. After Barrett it was our intention to cruise through the build in preparation for SEMA 2018. That all changed in Mid July after a conversation Procharger. They expressed interest in having the truck completed and in their booth for LS Fest in Kentucky and everyone involved in the build was very excited for the opportunity. We immediately sprung into action and the result is what you see below. The truck is not 100% SEMA ready but will be within the next handful of weeks. We have not made any dyno runs with it yet but that is on the short list of things to do. Here are some of the specs on our build. I will continue to post more and more photos and some videos as we continue in the up coming weeks leading to SEMA.

-Black powder coated chassis from FFR
-Heat and A/C
-Electric assist power steering
-Built All Aluminum LS1 Short block with 243 heads
-Mild Blower cam (575 lift 218 dur. @.050)
-Procharger LS Transplant supercharger kit with P1X blower upgrade
-Edelbrock Victor Jr. EFI intake manifold
-Holley 4150 throttle body
-PSI Conversion engine harness
-Built 4L60e transmission (built by Dynamic Racing Transmissions)
-3000 stall converter
-3.55 gears
-18 inch Rocket Racing Wheels

Just want to thank all our sponsors:

Procharger
Speed Hut Gauges
Amsoil
Dynamic Racing Transmissions
PSI Conversion

Special thanks to FFR of course, along with Mike from Extreme Powder Coating, Justin from Seamless Customs, Matt from Lakeside Machine and Mike from ABT Machine.

Below are several photos from LS Fest.

IMG_2919.jpg

IMG_2920.jpg

IMG_2944.jpg

IMG_2945.jpg

IMG_2948.jpg

IMG_2952.jpg