Gen I Coyote, Wiring Harness Mk IV roadster, Rev N page 7.
I was trying to get the behind the dash completed and noticed a couple of notes, I had made in the wiring manual.
I have the tan wire cut for the EFI harness to run the fuel pump. Problem is I see 3 blunt end cuts on the tan wires. I cannot find where it said to cut more than the 1 wire loop, which would leave 2 cut ends.
I can keep digging, but my shovel is getting dull.
Next my gauges, Speedhut Anniversary edition. I have a yellow with red and yellow with black on the wires coming out of a couple of the gauges. Which wire goes to the RF labeled wires and which goes to the gauge lead?
thanks for any help.