Heh all -

Need help getting my seatbelts functional. I put in a new set of C5 belts, switching sides on the install as directed by the manual. I wasn't able to get the belt to release from the spool right out of the box so I figured it they needed to be mounted at the correct angle to release. All mounted and no matter what I do I can't get either side to release and be functional. I can get the spool to release about a 1/2" at a time sequentially and eventually get the belt out enough to be useful but it takes about 10- minutes to do and once the belt retracts again it still doesn't work properly. I know these belt systems are really sensitive to angle, previous use etc but these are new out of the box and there are no blogs describing any sort of reset or unlocking procedure.

Anyone have words of wisdom for this challenge.

Thanks