Russ' Garage

Visit our community sponsor

Thanks Thanks:  1
Likes Likes:  2
Results 1 to 31 of 31

Thread: Insert Unigue Build Name Here

  1. #1
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like

    Insert Unigue Build Name Here

    Hey Fellas, Finally did the deal and ordered the kit. Can't wait to get started and document the build in here like so many have/are/will. Love the community here of fellow car guys (and a few girls I am sure)

    LOTS of great ideas I have seen when I should be running a business but seem to find myself lurking in here for awhile every day. I plan on copying a few ideas from them. As many say, I will try and give credit where I learned the tricks and ideas but also like many, I can't remember where I read half of what I read here. Don't be ashamed to give yourself a shout out if I stole and idea and didn't mention who from.

    Ordered the complete kit with the following.

    Powder Coated
    Coyote Drivetrain
    IRS
    Black Coated Headers
    Body Cut Outs
    Upgraded Leather Seats (to be changed with race seats later but wanted the Cobra seats so I can get my dad in and out to cruise him around)
    Coyote Power Steering
    Standard Width Lower Arms
    Regular Stock Gauges (May do something fancier so I didn't want to waste money)
    18" Replica Wheels
    Wind Wings
    Sun Visors
    Front and Rear Swaybars
    Brake Mesh Covers
    Heater Kit (Cause you know, Texans below 65 Deg need our heaters)
    Roll Bars Both Sides Black
    Assembled Louvers
    Trunk Strut
    Coyote Install Kit
    Kit complete date is estimated for 11-24

    As of right now I am looking to Black Out all the chrome and paint it Metallic Ruby Red with Metallic Black Stripes. Although if you ask my wife, I told her I am mixing Bass Boat flakes in it to keep it classy. Although the Grey and Orange Wareagle Scott did is a Sexy car and I have thought about that combo as well.

    Me weakness is electrical so be patient with me. Not saying I will ask stupid questions, just questions more than once.

    I have a 9 year old son that is looking forward to helping me out. My wife is even excited to help build cause she loves to put Legos together and I told her it will be like a HUGE Lego set. I have always had her support in my cars and racing addictions.
    Garage is all cleaned out and ready to build.

    Critigue and advice is ALWAYS welcome.
    IMG_6672.JPG
    IMG_6673.JPG
    Last edited by Texas Driver; 10-11-2018 at 09:31 PM.

  2. Likes wrp liked this post
  3. #2
    Straversi's Avatar
    Join Date
    Nov 2014
    Location
    Palos Verdes, CA
    Posts
    739
    Post Thanks / Like
    Are you building a car or performing surgery? That’s one nice garage. Can’t wait to see the build you put together.
    Welcome and keep the photos and updates coming.
    -Steve
    MK IV #8901 - Complete kit, Coyote, TKO-600, IRS. Ordered 5/23/16, Delivered 7/14/16, First Start 8/13/17, First Go-Kart 10/22/17. Build Thread: http://thefactoryfiveforum.com/showt...V-Coyote-Build

  4. #3


    Not a waxer
    Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    3,764
    Post Thanks / Like
    Congrats and enjoy! I'll look forward to following along

    Jeff

  5. #4
    Steve >> aka: GoDadGo GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    2,757
    Post Thanks / Like
    Blog Entries
    1
    Welcome Aboard & 10/4 On The Need For Heat Below 65 Degrees!

    Also, check out this build thread from Edwardb because it will supplement the heck out of the manual while giving you great ideas and guidance.

    https://thefactoryfiveforum.com/show...iversary-Build

  6. #5
    Senior Member TDSapp's Avatar
    Join Date
    Jul 2015
    Location
    Frisco, TX
    Posts
    483
    Post Thanks / Like
    So, what part of Texas are you in? Might be a few guys around you to help out if you need it.
    Tim Sapp
    11110001101
    Build Blog: http://hotrod.sapp-family.com/blog/

    33 Hot Rod
    Delivered 5/31/2017

  7. #6
    Junior Member Zots's Avatar
    Join Date
    Sep 2017
    Location
    Montgomery TX
    Posts
    22
    Post Thanks / Like
    I have a dolly that I no longer need - see photo below. And a body buck.
    I am in Montgomery, TX.
    289 - fia.jpg
    Last edited by Zots; 10-12-2018 at 11:23 AM.

  8. #7
    Member RMB's Avatar
    Join Date
    Feb 2011
    Location
    The Woodlands, TX
    Posts
    92
    Post Thanks / Like
    Congrats! There are several of us in The Woodlands area.

    Rob
    God is my cobrapilot!

  9. #8
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Richmond, TX SW part of Houston.

  10. #9
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by TDSapp View Post
    So, what part of Texas are you in? Might be a few guys around you to help out if you need it.
    I am in the SW part of Houston. Richmond, TX

  11. #10
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by Zots View Post
    I have a dolly that I no longer need - see photo below. And a body buck.
    I am in Montgomery, TX.
    289 - fia.jpg
    Hey Zots, You get yours rolling already? I was reading some of your thread the other day but got interrupted and didn't get to read very far.

  12. #11
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    Welcome Aboard & 10/4 On The Need For Heat Below 65 Degrees!

    Also, check out this build thread from Edwardb because it will supplement the heck out of the manual while giving you great ideas and guidance.

    https://thefactoryfiveforum.com/show...iversary-Build
    Thanks for the link to EdwardB thread. I have heard a lot about it but haven't made my way to his thread yet till today since you sent it to me. I have a bit of ADD when I read so I tend to hop around from one to another.
    Slidell, yup you know all about heat humidity and chills below 65.

  13. #12
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by Straversi View Post
    Are you building a car or performing surgery? That’s one nice garage. Can’t wait to see the build you put together.
    Welcome and keep the photos and updates coming.
    -Steve
    HA.........Built the house 15 years ago and after building several race cars and maintaining several more in the garage tends to mess up the floors. Couple months back I decided to bring one of my trailers home and to a super spring cleaning and through out a 16 foot enclosed trailer load of stuff I thought I would need one day. I am sure I will need 1/3 of it in the near future since I threw it out after having it for 10 years. Moved what was left to the driveway to have the floors done and repainted the walls and told my wife we needed a Cobra. She wasn't buying it at first then warmed up to the idea. Did a little photo shop on my iPhone and sent her this pic. Not sure if it sealed the deal but it made her laugh and that gets me halfway to approval normally.
    Told her the garage would look much better with these in it.
    DefaultKnockOutIMG.JPGDefaultKnockOutIMG (1).JPG

  14. #13
    Senior Member SSNK4US's Avatar
    Join Date
    Jul 2016
    Location
    Bakersfield, CA
    Posts
    130
    Post Thanks / Like
    Congrats and welcome to the family! LOVE your garage! What kind of 4-post rack is that? Challenger short home garage unit?

    Kurt
    If everything seems under control, you’re just not going fast enough....

    Build thread

    MKIV complete kit # 9395 delivered 7/31/18

  15. #14
    Senior Member BadAsp427's Avatar
    Join Date
    Jul 2018
    Location
    Summerville, SC
    Posts
    319
    Post Thanks / Like
    Let the fun begin!!! Congratulations and welcome to the excitement!

    Mk4 20th Anniversary #8690 ( #8 of 20 ) Purchased 8/18/18 Started 8/19/18 First Start 11-1-18
    Build Thread Click Here

  16. #15
    Senior Member Yama-Bro's Avatar
    Join Date
    Jul 2012
    Location
    Kearney Nebraska
    Posts
    625
    Post Thanks / Like
    Congrats. Love the garage! We are big Lego fans in our house too. Still waiting for a cool Cobra set to come out.
    Started dreaming of a Cobra around 1987
    Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018
    Click here for my build thread
    Serial #9158
    Design Engineer at BluePrint Engines

  17. #16
    Senior Member shark92651's Avatar
    Join Date
    Feb 2018
    Location
    Frisco, TX
    Posts
    318
    Post Thanks / Like
    Frisco, TX here. What sort of power train are you thinking?

  18. #17
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Going with the Coyote motor and TKO Trans. I hope to find an aluminum third member for the IRS. I want to shave a few pounds off of an already light car.

  19. #18
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    I have read in a couple of the build threads that FFR calls you and goes over your order once you place it online. The only call I got was when my CC was declined cause Chase thought is was a fraudulent charge. After the down payment cleared no calls were made about the order. Show of "hands" who got a call end who didn't?

  20. #19
    doddmoore's Avatar
    Join Date
    Mar 2018
    Location
    Jackson, MS
    Posts
    147
    Post Thanks / Like
    Blog Entries
    1
    I'm going to be self conscious about my thread title from now on, but congrats! Can't wait to see it!
    "Doddmoore," Mitchell Moore on facebook, Follow Tonks347Cobra on Instagram
    MK IV Complete kit, Blueprint 347, Holley Sniper EFI, TKO 600, Wilwoods, Power Steering, RT turn signals, FFR soft top
    My Build Thread: Tonks347, The Baker's Build
    Slow and steady wins the race.

  21. #20
    Senior Member
    Join Date
    Jun 2018
    Location
    North Vancouver, BC, Canada
    Posts
    137
    Post Thanks / Like
    Quote Originally Posted by Texas Driver View Post
    Show of "hands" who got a call end who didn't?
    LOL, nope no calls at all.
    Last edited by FF33rod; 10-29-2018 at 04:58 PM.

  22. #21
    wareaglescott's Avatar
    Join Date
    Apr 2016
    Location
    Auburn, AL
    Posts
    1,816
    Post Thanks / Like
    Nobody called me....of course the then sent me the wrong seats and side pipes....of course it was right on the order sheet anyways so probably would not have made a difference. haha

    Look forward to following the build.
    MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
    Build Thread http://thefactoryfiveforum.com/showt...e-build-thread
    PHIL 4:13 INSTAGRAM - @scottscobra

  23. #22
    Senior Member
    Join Date
    Aug 2015
    Posts
    645
    Post Thanks / Like
    In Lexington Kentucky, one of the ways for kids to make money was shoveling **** out of horse barns, the depressing thing about it is the horses lived in better houses than most of us kids. Most had air-conditioning, many had indoor showers, and all were heated. At that time I had eaten in kitchens with dirt floors, slept in bedrooms heated by a coal burning stove out in the living room, and had to carry water inside the house to wash my face in the morning. That is a nice garage. I wouldn't screw it up putting nasty old car in it

  24. #23
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    This is a bit off topic but here goes.
    With Christmas coming up, I feel I need to do something or buy something VERY special for my wife. I always seem to be able to surprise her but this year I am at a loss. With her being as cool as she is letting me go out of town to race when I want, go hunting with my buddies when I want and the ultimate, purchase the FFR Cobra, she deserves a hell-of-a gift. I feel as my gift last year kinda topped out my extraordinary ideas and don't want to fall short this year with the car arriving pretty close to Christmas.
    What have y'all done for your wives over the years to tell her how awesome she is in letting you live your dreams and hobbies with no guilt? Or vise versa, what have they done for you that surprised you like mad?
    Last year I was able to plan a trip to London for Spring Break to take her and my son to see her favorite band in concert. The hard part is that she is a simple down to earth girl. The biggest item on her wish list is another pair of Converse shoes, there is a Converse rainbow on the floor of our closet.

    By the way, I am itching to get my kit in. Although I am in the middle of building cabinets for my office and bunk bed/desk for my 9 year old son in the garage so its a bit of a mess.

  25. #24
    Steve >> aka: GoDadGo GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    2,757
    Post Thanks / Like
    Blog Entries
    1
    Hey Texas,

    Get Her A Dodge Challenger, Preferably In RED!

    That's What Mrs. Go-Dad Got!
    Your Son Will Like It Too When She Takes Him To School!
    You two can pass it down to your baby boy in 6 or 7 years when he gets his drivers licence.

    NOTE:,,, Get The Base Model V/6 (305 HP) & She'll Get 30 MPH On The Highway!
    ..............It will be quick enough to get groceries and a good car for your son when the time comes.


    Well Wishes From Louisiana, New Orleans To Be Specific!

    Steve
    Last edited by GoDadGo; 11-08-2018 at 02:24 PM.

  26. #25
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Has anyone used the stock 2015-19 Mustang Brembo brakes on the cobra? I did not do the Willwood brake upgrade on my kit. Had Willwood on a GTO I used to road race. Didn’t hate them, just wasn’t a fan of them.

  27. #26
    bobl's Avatar
    Join Date
    Aug 2014
    Posts
    202
    Post Thanks / Like
    Well, my wife calls my toys "man diamonds" so you can guess the rest of the story!

    Quote Originally Posted by Texas Driver View Post
    This is a bit off topic but here goes.
    With Christmas coming up, I feel I need to do something or buy something VERY special for my wife. I always seem to be able to surprise her but this year I am at a loss. With her being as cool as she is letting me go out of town to race when I want, go hunting with my buddies when I want and the ultimate, purchase the FFR Cobra, she deserves a hell-of-a gift. I feel as my gift last year kinda topped out my extraordinary ideas and don't want to fall short this year with the car arriving pretty close to Christmas.
    What have y'all done for your wives over the years to tell her how awesome she is in letting you live your dreams and hobbies with no guilt? Or vise versa, what have they done for you that surprised you like mad?
    Last year I was able to plan a trip to London for Spring Break to take her and my son to see her favorite band in concert. The hard part is that she is a simple down to earth girl. The biggest item on her wish list is another pair of Converse shoes, there is a Converse rainbow on the floor of our closet.

    By the way, I am itching to get my kit in. Although I am in the middle of building cabinets for my office and bunk bed/desk for my 9 year old son in the garage so its a bit of a mess.
    Mk IV Roadster, 347/516 HP, 8 stack injection, Astro Performance T5, 3-Link 3.55 gears, Purchased 08/2015, Graduated 02/2017

  28. #27
    Senior Member cv2065's Avatar
    Join Date
    Dec 2017
    Location
    Orlando, FL
    Posts
    728
    Post Thanks / Like
    Quote Originally Posted by Texas Driver View Post
    As of right now I am looking to Black Out all the chrome and paint it Metallic Ruby Red with Metallic Black Stripes.
    Just noticed this as this is the exact color combo I'm going for! Where did you get the inspiration? The Replica wheels looks great in gloss black. Just got mine back a couple of weeks ago. Good luck on your build!
    MKIV Roadster - Complete Kit - Delivered 7/17/18
    Build Thread: https://thefactoryfiveforum.com/show...V-Build-Thread

  29. #28
    Senior Member Fixit's Avatar
    Join Date
    Aug 2017
    Location
    Minneapolis 'Burbs
    Posts
    405
    Post Thanks / Like
    With her being as cool as she is letting me go out of town to race when I want, go hunting with my buddies when I want and the ultimate, purchase the FFR Cobra, she deserves a hell-of-a gift. I feel as my gift last year kinda topped out my extraordinary ideas and don't want to fall short this year with the car arriving pretty close to Christmas.
    What have y'all done for your wives over the years to tell her how awesome she is in letting you live your dreams and hobbies with no guilt? Or vise versa, what have they done for you that surprised you like mad?
    Sounds like you've got a keeper!
    Get her involved with the build. Ask for input on color choices, accessories, etc. Get her out in the garage to help - there's a zillion little doo-dads that'll require some cleanup, painting, whatever, let her do them.

    Probably one of the best things... Just say "Thank You" every once in awhile! When she asks "What for?", reply "Letting me have my big-boy toys without a hassle".

    c100_0166b[1].jpg MrsFixit01.jpg
    John D. - Minneapolis 'Burbs

    1965 El Camino - LT-1, 4L60e, 4wh discs, SC&C susp.
    2013 F-150 Platinum - Twin Turbo 3.5
    2018 Mk4 Roadster - #9365 Build Thread

  30. #29
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by Fixit View Post
    Sounds like you've got a keeper!
    Get her involved with the build. Ask for input on color choices, accessories, etc. Get her out in the garage to help - there's a zillion little doo-dads that'll require some cleanup, painting, whatever, let her do them.

    Probably one of the best things... Just say "Thank You" every once in awhile! When she asks "What for?", reply "Letting me have my big-boy toys without a hassle".

    c100_0166b[1].jpg MrsFixit01.jpg
    That is for sure. I do that quite often. Gotta have the respect and appreciation of what ya have. She is actually pretty excited for the build, she Loves doing Lego's so we talk like it is a HUGE Lego set. Looks like yours is enjoying the build a bit as well. I need to catch up reading on your build.

  31. #30
    Junior Member Texas Driver's Avatar
    Join Date
    Oct 2018
    Location
    Richmond, TX
    Posts
    27
    Post Thanks / Like
    Quote Originally Posted by cv2065 View Post
    Just noticed this as this is the exact color combo I'm going for! Where did you get the inspiration? The Replica wheels looks great in gloss black. Just got mine back a couple of weeks ago. Good luck on your build!
    Actually saw the Back Draft racing Cobra on eBay.....lol Funny how my wife and myself are not big fans of red but that color combo is just sexy. Your wheel is looking nice in that gloss black. My struggle is if I want to go with all gloss metallic black or do everything in a satin metallic black finish. I think I would also like to have the "spokes" black and the flat part of the rim aluminum to help break up the black on black of the tire. So many cool builds to follow on here, I find myself jumping from one to the other.

  32. #31
    Senior Member cv2065's Avatar
    Join Date
    Dec 2017
    Location
    Orlando, FL
    Posts
    728
    Post Thanks / Like
    Quote Originally Posted by Texas Driver View Post
    Actually saw the Back Draft racing Cobra on eBay.....lol Funny how my wife and myself are not big fans of red but that color combo is just sexy. Your wheel is looking nice in that gloss black. My struggle is if I want to go with all gloss metallic black or do everything in a satin metallic black finish. I think I would also like to have the "spokes" black and the flat part of the rim aluminum to help break up the black on black of the tire. So many cool builds to follow on here, I find myself jumping from one to the other.
    Same here. That Backdraft color combo is stunning. Although, if you look at the Ruby Red in the shadows, its a bit subdued and dark. Needs the light to bring it out, so I may go with something more 'red'. Thought about Satin as well, but I kept reading reviews on some of the Mustang forums that it always looked 'dirty', but that's certainly subjective. I'm going to be running the balloon lettering on the side of the tire, same as the Backdraft, so it should break up the black a bit. Either way you go, I'm sure it will look very sleek!
    MKIV Roadster - Complete Kit - Delivered 7/17/18
    Build Thread: https://thefactoryfiveforum.com/show...V-Build-Thread

  33. Thanks bbursey thanked for this post
    Likes bbursey liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Clever Turn Signal

Visit our community sponsor