coyote engine not square to chassis

[dan's33]

I’ve got my coyote installed and noticed the engine is not square to the fire wall or to the chassis. The enclosed pictures show 2 1/4” between the engine and the firewall on the passenger side and 1 3/16” on the driver side. The front of the engine is also closer to the frame on the driver side. As far as I can tell there is no adjustment at the engine mounts, Soooooo, what am I missing? Has anybody else run into something similar? I know the coyote is tight in the engine bay but some components are hitting on the drivers side plus I’m concerned about the engine not being centered. An inch difference seems like a lot to me and I’m not even sure how that could be, I don’t notice anything obviously out of alignment that would cause it. I also notice it when i installed the exhaust system which is skewed, drivers side muffler further back than passenger side. HELP!