Midwest Classic Insurance

Visit our community sponsor

Thanks Thanks:  76
Likes Likes:  47
Page 3 of 7 FirstFirst 12345 ... LastLast
Results 81 to 120 of 252

Thread: Redbone Has Graduated / The Official Dark Side Build Thead

  1. #81
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,000
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    Good To Know & Thanks!

    I'll scuff the body up with 80 up before I apply the Rage.

    Again, Many Thanks!
    Look at my photo in post #71.

    Jeff

  2. Thanks GoDadGo thanked for this post
  3. #82

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    The Dark Side MK-4 Was Moved To Higher Ground & We Picked Up All The Stuff We Could So Now We Wait!
    Hurry Up Barry & Get Your Windy Self On Land!
    Last edited by GoDadGo; 07-12-2019 at 09:14 PM.

  4. #83
    Senior Member SSNK4US's Avatar
    Join Date
    Jul 2016
    Location
    Bakersfield, CA
    Posts
    393
    Post Thanks / Like
    I’ve seen the marks on the wall in your shop/garage
    I hope Barry spares you. I can’t even imagine going through anything like that
    If everything seems under control, you’re just not going fast enough....

    Build thread

    MKIV complete kit # 9395 delivered 7/31/18

  5. #84

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by SSNK4US View Post
    I’ve seen the marks on the wall in your shop/garage
    I hope Barry spares you. I can’t even imagine going through anything like that

    Right now I've got about 2 more feet before the water gets on the slab.
    Lake Pontchartrain is getting filled from the East from the counter clockwise rotation of the storm.
    Normally this wouldn't be an issue with a storm this weak but the spillway, which is at the Western end of the lake, has been open since May in an attempt keep NOLA dry.

    Current Radar:
    https://www.wunderground.com/radar/us/la/slidell/lix

    Spillway Report From May:
    https://youtu.be/0P2MZRbD7eo

    Our street is the last to go under so we may bug out if the water comes up so I stay awake to wait & watch.

    NOTE:
    .. Heath Jones (Spillway Dude) Is A Factory Five Customer Who Is Building A 351-W Powered MK-4!
    Last edited by GoDadGo; 07-13-2019 at 01:35 AM.

  6. #85
    Senior Member SSNK4US's Avatar
    Join Date
    Jul 2016
    Location
    Bakersfield, CA
    Posts
    393
    Post Thanks / Like
    I’ll keep my fingers crossed for you Steve. I’ll keep my earthquakes and never trade them for hurricanes OR tornados

    Your up late?
    If everything seems under control, you’re just not going fast enough....

    Build thread

    MKIV complete kit # 9395 delivered 7/31/18

  7. Thanks GoDadGo thanked for this post
  8. #86

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by SSNK4US View Post
    I’ll keep my fingers crossed for you Steve. I’ll keep my earthquakes and never trade them for hurricanes OR tornados

    Your up late?


    I don't sleep well when the weather isn't nice ever since Katrina got us back in 2005.

  9. #87
    Senior Member rich grsc's Avatar
    Join Date
    Feb 2011
    Location
    O'Fallon, MO
    Posts
    3,068
    Post Thanks / Like
    Damn, sorry Steve I hate floods. Have lived on the Mississippi most of my life and have been through too many of them. Still cleaning up the this years. Good luck

  10. Thanks GoDadGo thanked for this post
  11. #88
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    Good luck, Steve. I know you're a veteran of flooding, but it has to be tough knowing it's coming and there's nothing you can do to stop it except evacuate and pray for the best.

    Dave
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  12. Thanks GoDadGo thanked for this post
  13. #89
    Mark Dougherty's Avatar
    Join Date
    Feb 2011
    Location
    Hershey PA
    Posts
    722
    Post Thanks / Like
    Steve you are in our thoughts and prayers.
    many Know I had a shop ( an old stone mill built in 1797) for more than a few years that is next to a beautiful trout stream.
    given the right storm situation it would flood up to 16'
    could not hurt the building but everything in it would be toast.
    Thankfully I was not in the building for a big 1.
    but my stress level escalated tremendously with every rain event.
    to this day heavy rains still raise my BP.
    The traveling Builder
    717-773-5624

  14. #90

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Hey Gang,

    We're doing fine being flooded in and this Louisiana Coastal Living Crap has got me looking at lift 4" kit for my truck.

    https://www.roughcountry.com/dodge-s...500-2wd-375257

    The nice part of living here is that I can be fishing in minutes, but flooding takes about the same amount of time too.

    Steve
    Last edited by GoDadGo; 07-13-2019 at 03:31 PM.

  15. #91
    Seasoned Citizen NAZ's Avatar
    Join Date
    Feb 2016
    Location
    "The High Country", beautiful Flagstaff, AZ
    Posts
    2,443
    Post Thanks / Like
    It's monsoon season here and as I heard thunder in the distance I was thinking of you and stopped to check the weather report there. Even as the winds have weakened it looks like y'all are in for another drenching. Be safe and God bless.
    Dart Little M 406" SBC 800 HP N/A & 1,100 HP on nitrous, 2-spd Powerglide with trans brake, 6,000 RPM stall converter, narrowed Moser 88 3.90:1 spool with 35-spline gun-drilled axles & Torino bearings, custom parallel four-link, custom tube chassis & roll cage NHRA certified for 8.5-sec (only two FFR Hot Rods have this cert).

    33 Hot Rod Super Pro Drag Racer Build: 33 HR NHRA Cert Roll Cage Build

  16. Thanks GoDadGo thanked for this post
  17. #92
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    Hey Gang,

    We're doing fine just flooded in, but this Louisiana Coastal Flooding Crap has got me looking at lift 4" kit for my truck.

    https://www.roughcountry.com/dodge-s...500-2wd-375257

    The nice part of living here is that I can be fishing in minutes, but flooding takes about the same amount of time too.

    Steve
    Steve,

    Go big or go home! Eight and a half inch lift on 37x13.50/R20s.



    Dave
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  18. Likes SSNK4US, GoDadGo liked this post
  19. #93

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Wow; That's What My Truck Wants To Be When It Grows Up!

    .......I drive a Short Box Regular Cab Ram 1500 and I've got to see what I can get away with since the parking garage at work limits me to 6'8".
    Last edited by GoDadGo; 07-13-2019 at 06:28 PM.

  20. #94
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    Wow; That's What My Truck Wants To Be When It Grows Up!

    .......I drive a Short Box Regular Cab Ram 1500 and I've got to see what I can get away with since the parking garage at work limits me to 6'8".
    Ha - The top of my cab is 7'6". The bottom of the doors are 31" from the ground.



    Stay dry my friend!

    Dave
    Last edited by Papa; 07-13-2019 at 07:05 PM.
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  21. Likes GoDadGo, SSNK4US liked this post
  22. #95

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    This was New Orleans earlier this week before the storm.

    https://youtu.be/w79_mTk_Vkc

    I got stuck in the parking garage for 4 hours before they pumped out that Special City That Lives Beneath The Sea!

    With That Said:. Hit It Harry!

    https://youtu.be/DXTQpB7QHe8
    Last edited by GoDadGo; 07-13-2019 at 07:11 PM.

  23. #96
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    This was New Orleans earlier this week before the storm.

    https://youtu.be/w79_mTk_Vkc

    I got stuck in the parking garage for 4 hours before they pumped out that Special City That Lives Beneath The Sea!

    With That Said:. Hit It Harry!

    https://youtu.be/DXTQpB7QHe8
    I'm sure the business owners along those streets really appreciated the cars adding the wake effect on top of the flood level.
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  24. #97

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    I actually am home today so I logged seven (7) to ten (10) more test miles before doing my 1st oil change on the new engine.
    Now it is storming outside so no grass cutting will get done, but at least I drove my car.
    Money & Time Seem To Never Match Up!
    Why Is That?
    Last edited by GoDadGo; 08-18-2019 at 07:16 PM.

  25. #98
    On a roll Al_C's Avatar
    Join Date
    Aug 2014
    Location
    Wheaton, IL
    Posts
    1,408
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    Money & Time Seem To Never Match Up!
    Why Is That?
    It's the natural order of things. Bugs me, too!
    Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
    Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount

  26. Thanks GoDadGo thanked for this post
  27. #99

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Got home early, pulled the car out and logged to ten (10) more test miles so now I'm going to clean the shop.

    ......My God This Thing Is Fast Off The Line With 3.73's Out Back, 383 Chevy Cubes & Six (6) Forward Gears To Make Go Dad Go!
    Last edited by GoDadGo; 08-31-2019 at 08:35 AM.

  28. Likes Ducky2009 liked this post
  29. #100

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Logged Another 10 Miles Today!

  30. #101
    David aka Ducky2009 Ducky2009's Avatar
    Join Date
    Dec 2016
    Location
    Lilburn, GA
    Posts
    774
    Post Thanks / Like
    Steve,

    How's the bodywork coming along?

    Ducky
    Last edited by Ducky2009; 09-01-2019 at 02:59 PM.
    MK4 Build #9035 Delivered 2/17/17, First Start & Go-Kart 6/2/17, Licensed 9/1/17
    Paint - Lightning Blue Metallic, No Hood Scoop, No Stripes
    Gen 2 Coyote Engine & TKO-600. Solid Axle, 8.8-3.55, Power Steering, Power Brakes, Dual Roll Bars
    Heater and Glove Box, Drop Trunk, Wipers, Radio, FFR Vintage Gauges, Custom Dash
    Build Thread: http://thefactoryfiveforum.com/showt...MK4-Build-9035

  31. Thanks GoDadGo thanked for this post
  32. #102
    Mark Eaton's Avatar
    Join Date
    Apr 2017
    Location
    Medford, Oregon
    Posts
    751
    Post Thanks / Like
    Keep Rocking' Brother!!
    MK4 #9130 , complete kit, arrived 8/10/2017, Street Legal 2/14/2020.
    DART SHP 347, EFI, TKO600, IRS
    http://thefactoryfiveforum.com/showt...n-Build-Thread

  33. Thanks GoDadGo thanked for this post
  34. #103

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Ducky2009 View Post
    Steve,

    Hopes the bodywork coming along?

    Ducky
    It is coming along slowly and looking really good.
    Two of my friends, who truly know what they are doing, have been coming by to inspect my work.

  35. #104

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Mark Eaton View Post
    Keep Rocking' Brother!!
    I'm trying and you do the same.

  36. #105

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Logged 10 more test miles on the back roads near my home, then took the car to a Hot Rod Run via the shameful use of my car trailer.

    > The car was a big hit with the Chevy Guys, but not so much with the Ford Fans.
    > Quite a few parents seemed to really like the car, probably because I let them put their kids in it.

    My pals Heath (351 Windsor) and Donny (396 Ford Edsel) brought their cars so Factory Five was well represented.

    NOTE VIA WIKIPEDIA:
    "FE" derives from 'Ford-Edsel.
    [1] Versions of the FE line designed for use in medium and heavy trucks and school buses from 1964 through 1978 were known as "FT," for 'Ford-Truck,'[2] and differed primarily by having steel (instead of nodular iron) crankshafts, larger crank snouts, smaller ports and valves, different distributor shafts, different water pumps and a greater use of iron for its parts.


    https://en.wikipedia.org/wiki/Ford_FE_engine
    Last edited by GoDadGo; 09-08-2019 at 11:03 AM.

  37. #106

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    We logged 10-12 more test miles and then Heath and I worked on his car.
    To say the least, his roadster's body is a lot rougher than mine.
    I'm glad that they are updating the molds next year.
    Last edited by GoDadGo; 09-15-2019 at 05:58 PM.

  38. #107

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    I've been busy at work so I only get to do a few test miles here and there.

    > Water temperature is hanging around 165-175 so I'm guessing the crazy thick cylinder walls are keeping the temperatures low in spite of the 185 degree thermostat.
    > The block is a Dart SHP which can be bored to 4.165", but I'm way below that at 4.030" so I'm assuming that this is a mitigating factor for the low temperature.
    > Oil temperature seems to be a bit high 205-210 F; however, my sender is on a sandwich adapter between the block and the oil filter with no oil cooler.
    > I'm seriously thinking about moving the sender to the oil pan, but don't feel like pulling the pan to install the sender.
    > Maybe when the body is off at the paint shop I'll consider making this change.
    > Not sure it if would be work going through the hassle or not.

    What Say You Guys & Gals?
    Last edited by GoDadGo; 09-29-2019 at 02:57 PM.

  39. #108
    Boydster's Avatar
    Join Date
    Aug 2014
    Location
    Maryville, TN
    Posts
    1,104
    Post Thanks / Like
    I think as long as you know your standard, you're fine. Just moving the sender may get you different numbers, but down the road, are we really looking at numbers or are we just watching to see if anything has changed?
    Oil temp normally runs a little hotter than water temp, and you're well below the point where the oil starts to break down more rapidly.
    I would leave it where it is.
    ---Boyd---
    MkIV #9042 build thread
    www.boss427.us
    427W, TKO600, Moser 3.55 rear.
    Delivered Feb 2017, Graduated Nov 4, 2019

  40. #109
    Senior Member CraigS's Avatar
    Join Date
    Feb 2011
    Location
    Blacksburg, Va
    Posts
    4,707
    Post Thanks / Like
    Oil at 205-210 is absolutely not a problem. I have read on many occasions that getting it over 212F is a good thing as that will boil out any condensation.
    FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.

  41. #110
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,000
    Post Thanks / Like
    Reading the temperature of active oil such as you have it rather than in the sump is actually a good thing. You have it in a good place and don't seem to have a problem. You'll eventually find that RPM has a greater effect on oil temp than ambient temperature.

    Carry on!

    Jeff

  42. #111

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Thanks Gentlemen!

    This is the first time I have used a sandwich adapter for this purpose.
    In the past I ran one simply to run an oil cooler, never an oil temperature sending unit.
    Boiling off any condensation, well that's a good thing when you live where the humidity runs in the 80-95% mark most of the years.

    Steve

  43. #112

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Logged 7 miles last Sunday and another 7 today.
    Even bought some cookies (2 dozen) from a lady who was selling baked goods where I usually turn around to make my way home.
    Plan to start taking the car apart to get after the body work sooner than later.
    Last edited by GoDadGo; 10-13-2019 at 07:35 PM.

  44. #113

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    We Are Closing A Chapter:
    We've had a major issue on the home front, which was similar to last year, so only limited test driving and wrenching could do over the past six or seven months.
    On October 16th we lost my wife's father (aka: Bayou Dave) and laid him to rest last Saturday.
    https://obits.nola.com/obituaries/no...197&fhid=40533

    Opening Up A New One:
    Yesterday we had a Birthday Bash for our Baby Girl who turned 26 on the 26th.
    The family was all there and as of yesterday Emma is engaged to a fine young man who knows his way around a Kitchen because he's a Chef in New Orleans.
    They've been together all through their college years, work well together and hope to one day open their own restaurant or fast casual eatery.

    Back To The Build:
    We'll be back to the build, probably as early as next week.
    We'll be planning a wedding for some time next year too.
    We'll be living life once more because life goes on.

    May God Bless You All & Your Families Too!

    Steve
    Last edited by GoDadGo; 10-27-2019 at 06:11 PM.

  45. Likes Boydster liked this post
  46. #114
    RJD's Avatar
    Join Date
    Jan 2017
    Location
    Northern Virginia
    Posts
    793
    Post Thanks / Like
    Sorry for your loss Steve. Congratulations to your baby girl!
    MKIV complete kit w/powder coating and cut outs, serial #9189 delivered 10/10/17, first start - 10/5/18, legal - 10/08/20. Blueprint 306 w/Holley Sniper EFI, TKO 600, power steering, Breeze fan shroud, trunk cubby, & engine compartment battery kit, CNC brake reservoirs, RT turn signal & gas pedal, mechanical throttle linkage, METCO safety loop, GASN side pipes, drop trunk, dual chrome roll bars, vintage gauges, glove box, custom center console, cup holders, and speakers.

  47. Thanks GoDadGo thanked for this post
  48. #115
    David aka Ducky2009 Ducky2009's Avatar
    Join Date
    Dec 2016
    Location
    Lilburn, GA
    Posts
    774
    Post Thanks / Like
    Sorry for your loss Steve
    MK4 Build #9035 Delivered 2/17/17, First Start & Go-Kart 6/2/17, Licensed 9/1/17
    Paint - Lightning Blue Metallic, No Hood Scoop, No Stripes
    Gen 2 Coyote Engine & TKO-600. Solid Axle, 8.8-3.55, Power Steering, Power Brakes, Dual Roll Bars
    Heater and Glove Box, Drop Trunk, Wipers, Radio, FFR Vintage Gauges, Custom Dash
    Build Thread: http://thefactoryfiveforum.com/showt...MK4-Build-9035

  49. Thanks GoDadGo thanked for this post
  50. #116

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    I was home this weekend so I did some wrench swinging and a bit more sanding before cleaning up the shop.
    This coming Saturday I'll be changing the plugs, re-setting the timing and adjusting the carburetor before logging some more test miles.
    On Sunday my pal Darrell-Darrell will be coming over to teach me how to properly apply body filler so that we can get the car primed and painted before Mardi Gras
    He joked about my Post Hurricane Katrina Sheetrock Floating Skills will likely come in handy; however, I reminded him that walls are flat and Cobras are nothing but curves.

    NOTE: Mardi Gras 2020 Falls On Tuesday, February 25, 2020.
    Last edited by GoDadGo; 11-18-2019 at 06:15 AM.

  51. Likes Papa liked this post
  52. #117

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Removed a bunch of stuff and started sanding and sanding and sanding.
    I also adjusted the trunk and tweaked the passenger side door.
    My primary goal is to NOT screw anything up.
    Last edited by GoDadGo; 11-25-2019 at 06:51 PM.

  53. #118
    On a roll Al_C's Avatar
    Join Date
    Aug 2014
    Location
    Wheaton, IL
    Posts
    1,408
    Post Thanks / Like
    Quote Originally Posted by GoDadGo View Post
    My primary goal is to NOT screw anything up.
    Amen!
    Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
    Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount

  54. Thanks GoDadGo thanked for this post
  55. #119

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,555
    Post Thanks / Like
    Blog Entries
    1
    Not wanting to leave well enough alone yet again, I fabricated two body supports that takes the load off of the Ram Horn Brackets.
    Now the front end is sold as a rock and I can easily repeat it's final position with little difficulty.
    Basically I'm supporting the soot so that nothing can droop.
    Sorry I don't have any video of this yet.

  56. #120
    Senior Member FF33rod's Avatar
    Join Date
    Jun 2018
    Location
    North Vancouver, BC, Canada
    Posts
    1,554
    Post Thanks / Like
    Hey Steve
    I'm a bit behind you (let's call it a month or so) on my '33. Heavily into fitting the doors, engine side covers, etc and then I'll be into knocking down the mold flash, etc.... It would be great if you posted more details on your approach and methods here. I know you'll be following the advice of the body "wise men" so it will be good to get it out there again. So far I've got some Dura-Blocks and just ordered some Soft-Sanders, also have a gallon of the Rage Gold, a roll of 80 grit for the initial rough stuff,....
    Steve
    Gen 1 '33 Hot Rod #1104
    347 with Holley Sniper & Hyperspark, TKO600, IRS, 245/40R18 & 315/30R18, DRL, Digital Guard Dog keyless Ignition

Page 3 of 7 FirstFirst 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor