Visit our community sponsor
Thanks:
1
Likes:
0
-
Senior Member
Camber/Caster Measurement Question
I understand that the camber/caster gauge must be square to the spindle, but is there any requirement for the camber/caster gauge to be in any particular vertical plane, such as the edge of the rim?
I think I want to build a fixture so that I can easily measure my camber & caster without having to remove the wheel spinner (recognizing of course that any adjustment would almost certainly require taking the wheel off).
Thanks,
John
MK IV Roadster #8631
Ford 302, Holley Terminator EFI, T5z, 3.55 Rear End, IRS, 17” Halibrand Replicas (9” front, 10.5” rear), Nitto 555 G2’s (275/40ZR17 front, 315/35ZR17 rear), Fast Freddie’s Power Steering, F5 Wilwood Brakes, FFMetal’s Firewall Forward, Forte’s Hydraulic Clutch & Throttle Linkage
https://www.ffcars.com/threads/phile.../#post-4776313
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor