Visit our community sponsor
Thanks:
0
Likes:
0
-
missing banjo bolts from front brakes
Hi Guys,
my POL has finally turned up so I can get on with the build.
During the waiting I have misplaced the banjo bolts for the front brakes. These are from the complete kit
What thread are they so I can go to my local autocrats store and replace them quickly
Keith
-
If they are Wilwoods, no banjos on the front. If standard kit brakes, any replacement from your favorite parts place will work.
-
Senior Member
You do have to be careful with the length if you have the standard mustang brakes. Some of the banjo bolts at the local auto parts store are too long. Here's the ones that I ordered:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Also, the instructions show 28 ft-lbs of torque. If you do that the head will pop off. Learned that the hard way. Just snug them up and lightly tighten if leaks show up.
-
Originally Posted by
cv2065
You do have to be careful with the length if you have the standard mustang brakes. Some of the banjo bolts at the local auto parts store are too long. Here's the ones that I ordered:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Also, the instructions show 28 ft-lbs of torque. If you do that the head will pop off. Learned that the hard way. Just snug them up and lightly tighten if leaks show up.
Spoken with experience!!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor