Midwest Classic Insurance

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Headlight harness wiring question.

  1. #1
    Senior Member
    Join Date
    Feb 2011
    Location
    Loveland, CO
    Posts
    462
    Post Thanks / Like

    Headlight harness wiring question.

    I have been laying out the wiring harness components. One that concerns me is the headlight harness that is shown in the manual as running out the upper half of tranny tunnel on driver's side and then along the block, over the motor mount and then up to the front of the chassis. Questionable area is you have to run very close to shorty header, as there is not much space at firewall to back of block. I am certain this location would melt the wire casing and maybe the wires themselves. I guess you could insulate wire or metal shield, but does this make sense?
    Other option would be along top of motor between head and intake manifold toward front and then drop down to chassis and continue on.

    Comments? Ralph

  2. #2
    Member
    Join Date
    Apr 2018
    Location
    Colorado Springs
    Posts
    48
    Post Thanks / Like
    How I ran mine.
    Straight out of the transmission tunnel across the manifold.
    Just long enough to run the wiring across the front bar right behind the radiator.

    IMG_20181201_183153.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor