Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  1
Results 1 to 5 of 5

Thread: 818 gauges

  1. #1
    Senior Member Hojo's Avatar
    Join Date
    Apr 2018
    Location
    Springfield MA
    Posts
    107
    Post Thanks / Like

    818 gauges

    I have decided to use Zero Decibel’s dash bezel. Therefore, I will have 4 52mm spots to fill. Now I need to choose the 4 and the brand and model while knowing very little. So far I’ve seen the following in the forum:

    Boost
    Oil pressure
    Oil temp
    Exhaust gas temp
    Air fuel ratio
    Voltage
    Other?

    I have a JDM EJ20 motor and will be using iWire but can’t use Cobb because of the JDM.

    If you were to pick 4 with what you know now what would they be?

  2. Likes Kiwi Dave liked this post
  3. #2
    Senior Member
    Join Date
    Mar 2014
    Location
    Hingham, MA
    Posts
    270
    Post Thanks / Like
    Quote Originally Posted by Hojo View Post
    I have decided to use Zero Decibel’s dash bezel. Therefore, I will have 4 52mm spots to fill. Now I need to choose the 4 and the brand and model while knowing very little. So far I’ve seen the following in the forum:

    Boost
    Oil pressure
    Oil temp
    Exhaust gas temp
    Air fuel ratio
    Voltage
    Other?

    I have a JDM EJ20 motor and will be using iWire but can’t use Cobb because of the JDM.

    If you were to pick 4 with what you know now what would they be?
    I have AutoMeter Oil pressure, Boost and Volts. If I were to add one more it would be oil temp. See attached photo. If you are able to stop by (see PM) You are welcome. 818 dash.JPG

  4. #3
    Senior Member STiPWRD's Avatar
    Join Date
    Jan 2014
    Location
    Leesburg, VA
    Posts
    1,624
    Post Thanks / Like
    Boost
    Air-fuel ratio
    Oil pressure
    Oil Temp

    I'm using Prosport gauges for oil pressure and temp. The AFR gauge is made by AEM because I needed the serial output for data logging.

  5. #4
    Senior Member Hojo's Avatar
    Join Date
    Apr 2018
    Location
    Springfield MA
    Posts
    107
    Post Thanks / Like
    One last bump before I order my gauges.

  6. #5
    Senior Member DSR-3's Avatar
    Join Date
    Oct 2015
    Location
    San Jose, CA
    Posts
    386
    Post Thanks / Like
    I can't comment on the functions, as I have a whole different animal. But for the 2 that I did use (clock, fuel) I've been happy with the look and quality of Speedhut products. I used the Revolution line.
    Last edited by DSR-3; 01-13-2019 at 01:12 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor