-
old fart from Minnesota
73 year old disabled veteran
got a 2800 sq ft shop for my hobby of mostly show cars
used to fabricate a lot when stock car racing for 18 years
building a hot rod truck in 2 months
bought a 347 stroker for it was gonna do a LS# but this is cheeper and hopefully less problems on wiring
going with aftermarket injection
how will the 3.55 gears work with a AOD ??? think that will be about 1200 RPM at 60 MPH and a big cam which will have to go instead of getting a loose converte
-
Senior Member
As some of the more experienced builders here would say, welcome to the madness
You'll have a lot of fun and this is a great community which seems to be the best resource for us.
I'm taking delivery of a 33 in a month or so, also planning a 347 with a 3.55 IRS but mating it with a TKO600.
Look forward to your build thread.
-
Where in Minnesota are you?
-
Ada MN north of Fargo 250 miles out of cities
being I cant figure out pix if you want to see my cars look up Eugene Vik on facebook
-
Originally Posted by
Houdini
Ada MN north of Fargo 250 miles out of cities
being I cant figure out pix if you want to see my cars look up Eugene Vik on facebook
Only a couple hours from you. Verndale,mn. Built a 33 hot rod.
-
Senior Member
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
I’m based in the twin cities and am building a truck with an AODE and 3.55 gears from a moser 8.8.
You’re welcome to come visit and take a look. I think I’ll turn 1600 rpm at 60...
-
-
Originally Posted by
Houdini
Ada MN north of Fargo 250 miles out of cities
being I cant figure out pix if you want to see my cars look up Eugene Vik on facebook
Welcome.
To post pics from your computer you need to click on the 3rd icon from the right side at the top of this text box, then click on "from computer".
You then navigate to wherever you have the pics stored on your computer, pic out one and upload it.
You can post up to 10 pics in one post. Make sure the file size isn't massive.
The other way is to host your pics at some remote site, copy the URL of that pic, then paste it in using the "from URL" instead of the "from computer" tab.
image.png
Last edited by JimLev; 10-09-2018 at 07:09 AM.
'33 Hotrod, #1047 Gen 1, delivered on 2/27/18, go cart on 9/24/18.
LS3 w/Gearstar Level 3 4L65e Tranny, Yank converter, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 235/45ZR17 R 295/35ZR18
Garage Built, Driveway Painted.
-
Senior Member
CVOBill
MK2 #???? Delivered 11/2002, Finished and Titled 6/2003 5.0, T-5, 4-Link, Sold 3/2005
Hot Rod #304 purchased 5/28/2017 from original owner Unassembled . Titled and plated 8/24/2017 Coyote,
TKO, 3-Link, Heat, A/C, Electric Power Steering, Convertible top
MK4 #9524 Picked up 1/18/19 306 Blueprint, T-5, 4-Link, Gas-N Pipes, Heater
-
will be in cities for swap this weekend have some time sat aft, wont be back there until spring then
-
found this site back was lost awhile and waiting for the truck, ordering parts and trying to get enuf stuff to geet er dun
-
well santa clause come yesterday and my truck arrived in the Stewart truck, finally , been a month wait
have to open a box or 2 today, looks like this is a big enuf job to assemble and install all the little parts
I have most of the shop open to do this and a big pile of wood to heat, need a few more pices and will try this with my spin on assembly