I’m in the early planning stages and of Gen 3 coupe and was curious if anyone had put a whippled coyote in one. If so, what modifications were made to make it fit. Yes, I realize N/A is more than enough power to have fun.
Thanks, Neil
Visit our community sponsor
I’m in the early planning stages and of Gen 3 coupe and was curious if anyone had put a whippled coyote in one. If so, what modifications were made to make it fit. Yes, I realize N/A is more than enough power to have fun.
Thanks, Neil
Has been done. Look up Gary Cosmer on the FFR Facebook groups.
Logan's Gen 3 Coupe-R Build
Ordered 4/23/19 | Delivered 6/29/19 | First Start 8/1/20 | First Drive 9/20/20
I'm like you I'll be ordering my kit soon
I've been trying to find out the same thing
when you look at the coupes with the Edelbrock they actually look like they have about an inch of clearance but I haven't seen one in person to validate that
I'm going to fit the new 3.8L Whipple in mine even if I have to modify the hood
I also have an Edelbrock 2650 coyote with 835whp that I was going to use but the new Whipple excited me to much
Last edited by jamminj; 04-19-2021 at 06:52 PM. Reason: spelling