BluePrint Engines

Visit our community sponsor

Thanks Thanks:  3
Likes Likes:  0
Results 1 to 8 of 8

Thread: Aluminum Grease Fitting Caps

  1. #1
    Senior Member JOP33's Avatar
    Join Date
    Dec 2016
    Location
    Haslet, Texas
    Posts
    1,009
    Post Thanks / Like

    Aluminum Grease Fitting Caps

    I am about to place an order for some Aluminum Grease Fitting Caps (apparently these are extremely difficult to find). On the standard 33', I believe there is (18) required. If anyone is interested in piggy-backing on my order please let me know within the next day or two (you can pm me). Current pricing is $5.00 each < 36, $4.00 each 37 to 99 and if we can get to 100...$3.25 each. We will have to calculate shipping, if other's are interested. Below is a pic...

    Grease_Cap.png
    33' Hot Rod Coupe/Roadster (GEN 1), Fendered, Ford 302, 350hp, EFI, AOD, 4-Link, Double Adjustable Koni Coilovers, Split Rear Exhaust, Electric Power Steering, AC/Heat/Defrost, Moser 8.8"-3.55, Willwood Front/Rear Brakes, 18" x 8" Fronts/20" x 10" Rears, Ordered: 1.26.17, Arrived: 3.29.17, First Start: 7.2.18, Go Cart: 11.4.18 Paint/Body: 2.23.19, Back Home: 11.24.19, Completed: NEVER!; View More Pics @ https://starmobileone.com/

  2. #2
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    You could spend a lot less and get these:

    https://rover.ebay.com/rover/0/0/0?m...2F181682740677

    s-l500.jpg

    Dave
    Last edited by Papa; 12-25-2018 at 12:11 PM.
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  3. Thanks Jetfuel, erlihemi thanked for this post
  4. #3
    Senior Member JOP33's Avatar
    Join Date
    Dec 2016
    Location
    Haslet, Texas
    Posts
    1,009
    Post Thanks / Like
    Quote Originally Posted by Papa View Post
    You could spend a lot less and get these:

    https://rover.ebay.com/rover/0/0/0?m...2F181682740677

    s-l500.jpg

    Dave
    Good point and I will check into it...hope the caps fit existing fittings as my time to remove and re-install new fittings would be worth the additional $1.35 a piece .
    33' Hot Rod Coupe/Roadster (GEN 1), Fendered, Ford 302, 350hp, EFI, AOD, 4-Link, Double Adjustable Koni Coilovers, Split Rear Exhaust, Electric Power Steering, AC/Heat/Defrost, Moser 8.8"-3.55, Willwood Front/Rear Brakes, 18" x 8" Fronts/20" x 10" Rears, Ordered: 1.26.17, Arrived: 3.29.17, First Start: 7.2.18, Go Cart: 11.4.18 Paint/Body: 2.23.19, Back Home: 11.24.19, Completed: NEVER!; View More Pics @ https://starmobileone.com/

  5. #4
    Senior Member FF33rod's Avatar
    Join Date
    Jun 2018
    Location
    North Vancouver, BC, Canada
    Posts
    1,554
    Post Thanks / Like
    Quote Originally Posted by JOP33 View Post
    I am about to place an order for some Aluminum Grease Fitting Caps (apparently these are extremely difficult to find). On the standard 33', I believe there is (18) required. If anyone is interested in piggy-backing on my order please let me know within the next day or two (you can pm me). Current pricing is $5.00 each < 36, $4.00 each 37 to 99 and if we can get to 100...$3.25 each. We will have to calculate shipping, if other's are interested. Below is a pic...

    Grease_Cap.png
    I'm in if you decide to order. Tim W is sold out and they weren't that popular apparently so he isn't going to place another order.
    Steve

  6. #5
    Senior Member MBB Larry's Avatar
    Join Date
    Feb 2018
    Location
    Grapevine, Texas USA
    Posts
    145
    Post Thanks / Like
    I'm in Jamie! Whatever you order, get a set for me. Maybe a couple extra??
    Larry
    FFR Hot Rod #1106

  7. #6
    Papa's Avatar
    Join Date
    Dec 2016
    Location
    Parker, CO
    Posts
    5,594
    Post Thanks / Like
    Quote Originally Posted by JOP33 View Post
    Good point and I will check into it...hope the caps fit existing fittings as my time to remove and re-install new fittings would be worth the additional $1.35 a piece .
    I don't think the caps will work without the fittings. Sorry to hijack your thread. I just thought they looked like a decent alternative.

    Dave
    My Build Thread: http://thefactoryfiveforum.com/showt...ter-Build-9754
    (Most viewed Roadster build thread on this forum!)

    Delivered: 6/17/2017
    First Start: 12/30/2017
    Completed: 12/7/2019
    Legal: 1/30/2020

    Member of the Mile-Hi Cobra Club
    Dave's Cobra YouTube Channel: https://www.youtube.com/channel/UCbk...npK1UZHj4R-bYQ
    Agora 1:8 Scale Cobra Build: https://thefactoryfiveforum.com/show...l-Build-Thread

  8. Thanks JOP33 thanked for this post
  9. #7
    Senior Member JOP33's Avatar
    Join Date
    Dec 2016
    Location
    Haslet, Texas
    Posts
    1,009
    Post Thanks / Like
    Quote Originally Posted by FF33rod View Post
    I'm in if you decide to order. Tim W is sold out and they weren't that popular apparently so he isn't going to place another order.
    Steve
    Ok Steve, yes I had checked with Tim as well and got the same answer a couple of months backs. I’ll add you to the list and let you know when I order.
    33' Hot Rod Coupe/Roadster (GEN 1), Fendered, Ford 302, 350hp, EFI, AOD, 4-Link, Double Adjustable Koni Coilovers, Split Rear Exhaust, Electric Power Steering, AC/Heat/Defrost, Moser 8.8"-3.55, Willwood Front/Rear Brakes, 18" x 8" Fronts/20" x 10" Rears, Ordered: 1.26.17, Arrived: 3.29.17, First Start: 7.2.18, Go Cart: 11.4.18 Paint/Body: 2.23.19, Back Home: 11.24.19, Completed: NEVER!; View More Pics @ https://starmobileone.com/

  10. #8
    Senior Member JOP33's Avatar
    Join Date
    Dec 2016
    Location
    Haslet, Texas
    Posts
    1,009
    Post Thanks / Like
    Quote Originally Posted by MBB Larry View Post
    I'm in Jamie! Whatever you order, get a set for me. Maybe a couple extra??
    Larry

    Got you down Larry.
    33' Hot Rod Coupe/Roadster (GEN 1), Fendered, Ford 302, 350hp, EFI, AOD, 4-Link, Double Adjustable Koni Coilovers, Split Rear Exhaust, Electric Power Steering, AC/Heat/Defrost, Moser 8.8"-3.55, Willwood Front/Rear Brakes, 18" x 8" Fronts/20" x 10" Rears, Ordered: 1.26.17, Arrived: 3.29.17, First Start: 7.2.18, Go Cart: 11.4.18 Paint/Body: 2.23.19, Back Home: 11.24.19, Completed: NEVER!; View More Pics @ https://starmobileone.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor